• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD LH Flintlock Target .32 Reduced

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 1, 2019
Messages
133
Reaction score
189
Location
Canyon Lake, TX
Here's one you don't see every day. Some might call it a chunk gun as it meets the tradition of a southern style rifle with a long heavy straight barrel. It weighs about 8 1/2 lbs. It certainly is a target rifle as it has a Lyman adjustable peep rear sight and globe front with changeable inserts. I ordered a full set of inserts that will be included. The rifle was built by Dave Motto in West Virginia. I have no idea how old it is but it is in very good shape with a few minor dings. It's also accurate. More accurate than my old eyes will take advantage of. Yesterday I was experimenting with loads and the rifle consistently put .310 balls into one ragged hole from the bench @ 25 yds. I also had very fast ignition with zero misfires. Barrel is a GETZ, length 42", 3/4" across the flats, twist 1:48". LOP: 14" to front trigger. LOA: 58". Lock has DM (Dave Motto?) stamped inside. Only other mark is a "L" on the tumbler which probably means LEFT. As noted, lock works very well. Stock is beautiful tiger stripped maple. Furniture is iron. Ramrod has a splinter missing from rear end. I have a new hickory replacement to be included. MYSTERY SCREW: there is a dome headed screw on the right-upper barrel flat. I have no idea what its for. Part of a different sight mounting? A way to get powder behind a dry-ball? I tried to remove it and discovered it really likes being where it is. Next step would be to apply heat or, as someone on the forum suggested, file it off flat. I decided to leave it. It doesn't hurt anything and it sure is a conversation starter. PRICE: $1,200 shipped and insured in the CONUS. Will be shipped in a wooden crate. TRADES: I'm always open to interesting trades. Nowadays a trip to the range is the high point of my week and having a new gun to try out is icing on the cake. Flintlocks only. Being a lefty I do have one other rule. Right- handed locks are fine but the presence of a right-handed cheek rest is a deal breaker. Call me picky but that rest on the wrong side screams "Not my gun". Anybody got a Jaeger?
 

Attachments

  • IMG_20220928_130828885.jpg
    IMG_20220928_130828885.jpg
    1.6 MB
  • IMG_20220913_170734674.jpg
    IMG_20220913_170734674.jpg
    3.6 MB
  • IMG_20220910_163850366.jpg
    IMG_20220910_163850366.jpg
    1.6 MB
  • IMG_20220910_163414675.jpg
    IMG_20220910_163414675.jpg
    3.9 MB
  • IMG_20220910_163421569.jpg
    IMG_20220910_163421569.jpg
    2.7 MB
  • IMG_20220910_163456479.jpg
    IMG_20220910_163456479.jpg
    2.1 MB
I am interested in learning more. I tried to send a pm but don't know if it sent. You'll have to forgive my noob status on this site. If you can kindly check your messages and see if it sent or if not send me a pm to discuss.
Thanks!
 
Here's one you don't see every day. Some might call it a chunk gun as it meets the tradition of a southern style rifle with a long heavy straight barrel. It weighs about 8 1/2 lbs. It certainly is a target rifle as it has a Lyman adjustable peep rear sight and globe front with changeable inserts. I ordered a full set of inserts that will be included. The rifle was built by Dave Motto in West Virginia. I have no idea how old it is but it is in very good shape with a few minor dings. It's also accurate. More accurate than my old eyes will take advantage of. Yesterday I was experimenting with loads and the rifle consistently put .310 balls into one ragged hole from the bench @ 25 yds. I also had very fast ignition with zero misfires. Barrel is a GETZ, length 42", 3/4" across the flats, twist 1:48". LOP: 14" to front trigger. LOA: 58". Lock has DM (Dave Motto?) stamped inside. Only other mark is a "L" on the tumbler which probably means LEFT. As noted, lock works very well. Stock is beautiful tiger stripped maple. Furniture is iron. Ramrod has a splinter missing from rear end. I have a new hickory replacement to be included. MYSTERY SCREW: there is a dome headed screw on the right-upper barrel flat. I have no idea what its for. Part of a different sight mounting? A way to get powder behind a dry-ball? I tried to remove it and discovered it really likes being where it is. Next step would be to apply heat or, as someone on the forum suggested, file it off flat. I decided to leave it. It doesn't hurt anything and it sure is a conversation starter. PRICE: $1,200 shipped and insured in the CONUS. Will be shipped in a wooden crate. TRADES: I'm always open to interesting trades. Nowadays a trip to the range is the high point of my week and having a new gun to try out is icing on the cake. Flintlocks only. Being a lefty I do have one other rule. Right- handed locks are fine but the presence of a right-handed cheek rest is a deal breaker. Call me picky but that rest on the wrong side screams "Not my gun". Anybody got a Jaeger?
Here's one you don't see every day. Some might call it a chunk gun as it meets the tradition of a southern style rifle with a long heavy straight barrel. It weighs about 8 1/2 lbs. It certainly is a target rifle as it has a Lyman adjustable peep rear sight and globe front with changeable inserts. I ordered a full set of inserts that will be included. The rifle was built by Dave Motto in West Virginia. I have no idea how old it is but it is in very good shape with a few minor dings. It's also accurate. More accurate than my old eyes will take advantage of. Yesterday I was experimenting with loads and the rifle consistently put .310 balls into one ragged hole from the bench @ 25 yds. I also had very fast ignition with zero misfires. Barrel is a GETZ, length 42", 3/4" across the flats, twist 1:48". LOP: 14" to front trigger. LOA: 58". Lock has DM (Dave Motto?) stamped inside. Only other mark is a "L" on the tumbler which probably means LEFT. As noted, lock works very well. Stock is beautiful tiger stripped maple. Furniture is iron. Ramrod has a splinter missing from rear end. I have a new hickory replacement to be included. MYSTERY SCREW: there is a dome headed screw on the right-upper barrel flat. I have no idea what its for. Part of a different sight mounting? A way to get powder behind a dry-ball? I tried to remove it and discovered it really likes being where it is. Next step would be to apply heat or, as someone on the forum suggested, file it off flat. I decided to leave it. It doesn't hurt anything and it sure is a conversation starter. PRICE: $1,200 shipped and insured in the CONUS. Will be shipped in a wooden crate. TRADES: I'm always open to interesting trades. Nowadays a trip to the range is the high point of my week and having a new gun to try out is icing on the cake. Flintlocks only. Being a lefty I do have one other rule. Right- handed locks are fine but the presence of a right-handed cheek rest is a deal breaker. Call me picky but that rest on the wrong side screams "Not my gun". Anybody got a Jaeger?
Do you still have this rifle for sale?
 

Latest posts

Back
Top