• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Making a Shooting Bag

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Either is a good path. There's a fowler pouch pattern here on the site, with pdf downloads for each piece. It's a dandy bag, but a little more complicated than a simple bag. Read and think it through before sewing. Check the craftsman section here too, especially back threads for more examples and links to patterns. Lots of example photos and good ideas. There are some great books out there too.

Two quick words of advice:

Numero uno, I made my first one from cut-up blue jeans, just to get a feel for the way things went together. Dirt easy and turned out a useful shoulder bag, PC or not, in a couple of hours.

Numero dos, figure on making several if the fever bites you, so don't be too hard on yourself if you get a booboo here and there. Each one you make will be better than the last. I'd start with a cheap piece of "learning leather" to learn all possible mistakes, then go on to a good piece for the bag you really want.
 
The Book of Buckskinning VI (ed by Wm Scurlock, Rebel Publishing Co ISBN 1-880655-01-2)

1st Chapter-
The Traditional Hunting Pouch by Steven M Lalioff
 
Yep. What those guys said. :thumbsup: Don't forget you can modify a pattern to better suit your needs. And try not to bleed too much on the leather. :haha:
 
Either way is fine. You can look online and see something you like. I've done that and then printed out a photo. You can then blow it up and make your own pattern!
 
I think your bag looks great. :bow: We are all our own worst critics. How did you weave the strap? I would like to learn how to do that. I am intrested in the pattern you used.
 
Ricardo,

This a card woven strap. I used playing cards and a simple wooden frame to support the yarn. The piece of wood was just a 2x4 about 7 ft long. The only problem with this setup is the yarn gets really tight toward the end of the strap. Others with more experience would most likely have suggestions on how to overcome this problem. I have included the link for the pattern. I just the changed the colors. I used cotton yarn for the strap.

Link to Malarky Crafts weaving pattern

I found the TabletWeaver software from the same site really good for experimenting with colors. Just change the colors and see what it looks like. Ever better the software is free. I had to play with it for awhile to get the hang of using it. Here is the link for the software:

Malarky Crafts TabletWeaver Software

Brett Sr. did a good photo tutorial on card weaving. I found it very useful. I just checked and some of the picture are now missing, but it is worth looking at.

Brett Sr. Card Weaving Tutorial

If you need any help, just send me a PM and I will do what I can. That strap is the only thing I have woven, but I learned alot in the process.

Tim
 

Latest posts

Back
Top