My newest build

[Kyblackpowder]

This is a Pecatonica River southern mountain kit with cm4 curly maple stock and a small Siler lock . In a 45 cal . Fire blue hardware

 

[hanshi]

Very good job!

 

[Eric Krewson]

Your lock panels are a bit large, TN rifles tend to have slender lock panels.

My version of the same kit stock from Pecatonica. Another thing I do is start a taper of the top lock panel from above the sear screw to gradually fade the wood into the stock towards the barrel. This way I don't have to cut a notch for the **** to travel in that will be visible.

You can see the fade out in this picture.

 

[Treestalker]

What is the barrel thickness across the flats on that .45? Looks like an inch in the photo. Chunk gun?

 

[Kyblackpowder]

It’s a standard green mountain barrel. In a 45 straight oct.

 

[pooch156]

What is the barrel thickness across the flats on that .45? Looks like an inch in the photo. Chunk gun?

Looks like 13/16" to me

 

[Kyblackpowder]

Your lock panels are a bit large, TN rifles tend to have slender lock panels.

My version of the same kit stock from Pecatonica. Another thing I do is start a taper of the top lock panel from above the sear screw to gradually fade the wood into the stock towards the barrel. This way I don't have to cut a notch for the **** to travel in that will be visible.

View attachment 92002

You can see the fade out in this picture.

View attachment 92004

Well I thought it look a little odd . But I could find a good reference. I more likely will fix it . Thanks

 

[tom_in_vt]

Beautiful flintlock!

 

[Eric Krewson]

I used the TN rifle plans from TOW for my reference as well as looked at a ton of southern rifles over at the ALR virtual library.

Lots to look at;

https://americanlongrifles.org/forum/index.php?board=112.0