dang. im sort of new at this but dont think i want my barrel relined if that is going to happen. thank you for showing this problem.
Relined barrel proble
- Thread starter farrokhrt
- Start date
Help Support Muzzleloading Forum:
- Joined
- Feb 28, 2019
- Messages
- 3,633
- Reaction score
- 4,624
Dear Urban Coyote Yes the very same The inimitable Jerry C ,Great Philosopher & barrel maker Ide buy his barrels At F 'ship & he'd give me great deals on rejects or oddityies All of which Ide make into guns mostly for me. Even one short Oct barrel of 58 cal with a pitch of 1 in 16" it had' trash 'written on it in marker , I wedded it to a short unsaleable bit of nice dense Maple from Vern Davis ? the Lock was bits of a Chambers Jager plate cock & Steel but I made late' English' lock internals and a vestigial 'Dog a cheek stocked rifle ' . I think it was faulted but he gave it me for singing a humorous ditty a reliefe from the hot dusty boredom I suppose, or Ide juggle for him , Never let go of the balls mind (Otherwise they fell out of my hands ) I shall have to get my daughter to send a pic of it .I visited him one time really Uneek Gentleman I bought a lot of barrels just wrapped them up & off by the nearest post office to UK or . NZ just like that try. That today !. Harrison was good value too his 'lucky elephant 'box had all sorts of goodies '.Memory lane ' but good ones dust & heat aside I was sort of a' Booth hopper' or with Ackermann sometimes .
Regards Rudyard
- Joined
- Nov 16, 2009
- Messages
- 4,627
- Reaction score
- 8,355
He’s done a couple like that for me, .450/.458”. And two .400/.408. Very good shooters and now I’m thinking about a conical shooting .32 for picket pins and coyotes.
I guess if the barrel was checked before it left the shop you wouldn't have to pack it back up and go to the post office and ship it back and go through that whole hassle.
I did the same thing with no call back so it is what it is for me.
I don’t know how old Mr. Hoyt is but I remember seeing his ads in Muzzle Blasts back in the early seventies. He has done barrel work for me and I’ve had no complaints, but he is getting up in years and I believe he is hoping to retire. When I spoke with him on the phone last year, I asked if the rumors about his training a protege were true, and I don’t remember exactly how he phrased his response, but I understood that whoever was working with him was not “there” yet, and I got the impression the individual would probably not be taking over the shop as a primary business. That seems like a great opportunity for someone with years ahead of him (or her), to be trained by a master and take over a fully-equipped business with an established clientele.
I have heard of a business in one of the western states, maybe Great Plains Reboring or something like that, that has done a few muzzleloaders, but I don’t think they are seeking that kind of business.
It would seem that some of the smaller barrel makers, like Burton or Oregon Barrels, would consider at least some reboring/ rerifling jobs, but I don’t think they do.
I’ll try to look up that Great Plains outfit. I probably got the name wrong.
Notchy Bob
I have heard of a business in one of the western states, maybe Great Plains Reboring or something like that, that has done a few muzzleloaders, but I don’t think they are seeking that kind of business.
It would seem that some of the smaller barrel makers, like Burton or Oregon Barrels, would consider at least some reboring/ rerifling jobs, but I don’t think they do.
I’ll try to look up that Great Plains outfit. I probably got the name wrong.
Notchy Bob
BeardedGunsmith
40 Cal
I've relined quite a few barrels. It's not difficult but time consuming.
Well, I was close, but did get the name wrong. The outfit I was thinking of is High Plains Reboring & Barrels, LLC. The proprietor is named Norman Johnson, and his business is located in Turtle Lake, North Dakota. I'm not going to post his phone number or address here, but you can find it easily, as I did, with a straightforward Google search if you are interested. I did not find a website or email address for High Plains Reboring in my Google search. A lot of these specialty outfits are quite small, and if they get too much publicity, they can be overwhelmed with time-consuming and frequently pointless calls and queries. Mr. Johnson reportedly advertises in the printed version of The Black Powder Cartridge News (BPCN), but as an online subscriber, I did not see an ad for his business on that magazine's website.
However, there was an article referencing High Plains Reboring in the Summer 2023 issue of the BPCN, entitled "An Old Hunter Afield Again," by James Bowen. The author had an antique muzzleloader that was in pretty good shape overall, but it had a rusty, damaged bore. Here is a direct quote from Mr. Bowen's article:
"In a previous issue of The Black Powder Cartridge News, I came across an ad for The High Plains Reboring & Barrels, LLC, Norman Johnson owner. Johnson agreed to rebore the rifle and recut the rifling. I was very surprised to have the barrel back in my hands within two weeks! It is now a .330 bore and able to shoot .310 roundballs. On the first shot at the range I thought I might have missed the paper at 25 yards. I couldn’t see a hole until I walked up to the target. There was a dead “bullseye,” in fact, the next four shots all hit the 2-inch bullseye! Thank you, Mr. Johnson! The [rifle] shows a preference for 20 grains of FFFg and two .010 patches with the .310 roundball."
High Plains Reboring was also discussed briefly in a thread here on the Muzzleloading Forum in 2022: High Plains Reboring
That's about all I know about it. It appears Mr. Johnson has the skills and equipment for recutting muzzleloaders, but I get the impression that is not his specialty. In any event, it is good to know that we have options, and maybe someone who will continue to "carry the torch" after Mr. Hoyt retires.
Best regards,
Notchy Bob
Norman is not a young man either. I would guess him to be in his mid 70s. But I am a bad judge of age.
I sent the barrel and got it back today. All is well and blockage removed!
Got the barrel back from Mr. Hoyt today and the blockage in touch hole is removed and cleared. I’m happy with work and am sure it will shoot well. Mr Hoyt is a gentleman. I do appreciate his work and quick response to this issue.
+1 for Bobby Hoyt. Stands by what he does.
ADK Bigfoot
ADK Bigfoot
- Joined
- Dec 25, 2011
- Messages
- 9,487
- Reaction score
- 4,653
I've lined a few .22 barrels and one in 32-40 mostly using the sweat in method which is a lot more work but I do prefer the results. Almost all reline jobs are done now with epoxy or loc- tite as was said and with good results. I've used epoxy for one which shoots really well but it's hard to conceal the joint line in the muzzle with adhesive lining. It can be peened closed but still hard to make disappear.
I would remove the breech plug , line the bore and refit the breech plug after the adhesive is cured if it were mine.
- Joined
- Dec 15, 2016
- Messages
- 1,616
- Reaction score
- 4,148
I couldn't imagine doing it any other way.
That a great talent you have. I’m pretty impressed with my barrel as I can’t see the liner to barrel joint.
- Joined
- Dec 25, 2011
- Messages
- 9,487
- Reaction score
- 4,653
Similar threads
