My CVA Hawken that I bought from an individual(the same cad, that said I as a newbie should be loading 100grns with Sabots)and the butt has the raised cheek piece. I have never liked cheek pieces or such and am curious if I can sand that down to smooth & flush with the butt without harming the integrity or the strength of the wood? I am familiar with finishing and refinishing wood so that part poses no particular problem for me.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
removing the raised cheek piece
- Thread starter tobias
- Start date
Help Support Muzzleloading Forum:
My first kit was a CVA Mtn rifle..since I'm left-handed, and it was a right handed gun, the cheek piece was useless to me...I got an occasional razzing for putting the gun to the "wrong shoulder"...I took it off...still shoot the gun, 35 years later..go to it..Hank
patch knife
40 Cal.
- Joined
- Nov 6, 2005
- Messages
- 246
- Reaction score
- 0
We were all greenhorns too once upon a time :thumbsup: .tOBias said:
Holy smokes, I just read or rather re read my post. The way it reads, I am gaining confidence in this forum. What I meant to convey is that since I joined this forum and thanks to all you good folks who have so graciously helped me in my learing I have gained much confidence in living the life of a black powder shooter.
patch knife
40 Cal.
- Joined
- Nov 6, 2005
- Messages
- 246
- Reaction score
- 0
:winking: I know what you meant , Tobias . As for myself (and most likely the majority of the members of this forum) , I am happy to help polite and respectful folks , such as yourself , any way I am able to . Being able to help in some way , is it's own reward and enables me to give a little bit back to something that has given me so much . ......patch knife (formerly 54 Renegade)
Mike Brooks
Cannon
- Joined
- Jul 19, 2005
- Messages
- 6,686
- Reaction score
- 33
A wood rasp is what I'd use. It would take a week and a half to sand it off.... :winking:
Good luck on your project! :thumbsup:
Good luck on your project! :thumbsup:
Guest
Get a rasp, like Mike recommends, besides it's one of those primary tools that if yer gonna build, kit or scratch, you will use a lot. Buy a good one they're pretty reasonable, and should last a long time. Bill
If you use the wood rasp, switch over to a double cut bastard file when you get down to within 1/16 of the finished surface. The rasp is notorious for brusing the wood grain. This brusing will show up when you "whisker" (apply water to raise the grain) the stock.
Although it's not PC, if you have access to a belt sander or a drum sander, it will do a nice job of removing the majority of the wood.
For rapid removal, sand/file "across the grain". As it gets down to finished size, sand/file "with the grain"
Although it's not PC, if you have access to a belt sander or a drum sander, it will do a nice job of removing the majority of the wood.
For rapid removal, sand/file "across the grain". As it gets down to finished size, sand/file "with the grain"
Sorry for the delay in getting back to you, I have been up to my hip pockets in alligators and no signs of draining the swamp. :shocked2: Thanks for that tidbit, I have not started the project yet, > I want to get it done by christmas though I am thinking to give it to my 15 year old son for a gift.
