Don’t know what you have tucked away in your gun safe, but you may already have the answer to your dilemma. I would start with your favorite gun loaded to pistol level powder charges and see what you get. Maybe 30 grains or so of powder as a starting point. Once you have an accurate load at a reasonable hunting distances, say 50 yards, test the load. I know when I was a youngster, the old man had us shoot at a couple of sheets of 3/4” plywood spaced about 1-1/2” apart (thickness of 2x4 framing). If whatever we were ‘testing’ at a specific distance didn’t blow through the first sheet and severely damaged or penetrate the second sheet, it was not acceptable for deer hunting. Simple test, but clear cut. You might be surprised. And in your case, a few more grains of powder over the powder puff loads with guns you already own may get you in the winner’s circle. Biggest problem today is cost of plywood.I am considering having a .40 or .45 southern mountain rifle for target shooting, offhand practice, and up to deer hunting. It will probably have a swamped 42" to 45" barrel. I know the .40 would be no problem recoil wise, but not sure about the .45. Roundballs only. Any thoughts appreciated.
Good luck. Age is going to catch us all.
Last edited: