Sealing leather dye

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SgtErv

50 Cal.
Joined
Nov 30, 2015
Messages
1,338
Reaction score
19
So a few of the leather items I've made or just re-stained with Feiblings leather dye have a bad tendency to rub off on my clothes. I've heard of a few concoctions like neatsfoot oil/beeswax, but I'd like to hear of some of your suggestions.

(I also have polished with blackball, but not until recently, and this has always been an issue; especially on rainy days or days where I'm sweating a lot)

My hunting frock and sleeved waistcoat will appreciate it. Thanks!
 
You may wish to try removing the excess surface dye with rubbing alcohol. Might help minimize transfer.
 
An easy answer for black is vinegaroon rather than an actual dye. Vinegaroon does not rub off once well rubbed clean after application. I have no good answer for colored dyes, other than modern type sealers that are often too glossy.
 
Man I know that problem,,
I spoke with a friend that has local Leather repair shop about it and he said to spend a bunch of time and several hunks of clean cloth rubbing the leather down after it's dried. He's right, color keeps coming off for a long time.
making the leather wet with a damp cloth before applying Fiebings helps too.
I've tried Neats foot oil and Sno-seal and neither works better then the other. Both still allowing some bleed of the color.
I did some tool bags for my motorcycle using vegtan and after staining used a commercial spray water proofing and that's been about the best results.
The stuff I used was by Bickmore call Gard-more Water and Stain Repellent.
One of these bags does rub against my leg and I've had no color transfer
 
Allow plenty of time for it to dry and rub it out well with clean soft cloth like a well washed sweatshirt. A good quality wax will seal it without giving it a glossy finish and this is a great product: Leather Balm With Atom Wax Neutral By Fiebing. I only use Fiebing alcohol based dyes, not water based and have never had a problem.
 
Thanks gents. This stuff arrived yesterday and I applied some to my cartridge pouch and two knife sheaths. It looks great, feels really smooth, and rubbing with a cloth doesn't leave it brown anymore. Awesome

As always, much appreciated :hatsoff:
 
hawkeye2 said:
There are two makers of leather care/crafting products that stand head and shoulders above all others and they are the only ones I will use: Fiebings and Lexol.
:thumbsup: :thumbsup: :thumbsup: :thumbsup:
Gus
 
Back
Top