southern mountain mod

[MSW]

way back in the long ago, i came into a Kibler SMR in walnut ... very pretty with some decent figure (which you don't often get in walnut, at least in my experience). But here's the thing ... i am looking at the wrist, which is basically an oval in cross section, and i would like to make it more trapazoidal ... so, several "demb questions"

am i changing it into some other sort of Appalachain and if so, which one?


am i goint to weaken the wrist unduly if is remove the material> (the rifle is a .45 caliber, if that's significant)

any help would be appreciated

 

[Mgbruch]

The wrist is as it should be.

 

[ronaldrothb49]

The flat sides and sharp angles of a trapezoid is Not anything that would be used on the wrist of a rifle and would probably be very uncomfortable to try and hold.

 

[Eric Krewson]

I lowered the comb, thinned and rounded the wrist and extended the wrist back into the buttstock a little, I tend to mess with things but that is just me.

I think it looked OK;

 

[MSW]

well, for what it's worth, i went and started the BP (Big Project) ... the thing won't be a sharply angled trapezoid, but there'll be some flattening out of the curve and some blending as it goes back to the buttstock ... also want to take a bit off the blend where the panelsmeet the forestock, to make it look thinner and longer ... i might take some off the forestock, but Kibler has pretty much already done that for us ....

i willl try to get photos posted, but i'm not very tech- savy...