• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FOR SALE T/C Renegade .54 Caliber

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 13, 2024
Messages
101
Reaction score
187
Location
Bennett, Colorado
This rifle belonged to my father. He used it one season. He used Pyrodex in it with conical maxi balls. His legs got too bad from diabetes to even go hunting after that.
The bore is pristine after I swabbed the light surface rust out of it. It’s been in a gun safe on the arid eastern planes of Colorado.
I’m a flinter so I figured someone could get some use out of it.

It has Lyman sites on it now but I have all the parts to reinstate them. This rifle is at least 20 years old. And went hunting once.

There are some light scratches on the stock which probably came from being in a crowded gun safe with a dehumidifier. My father was meticulous with his firearms. He was also a CMP Garand match shooter like myself. Retired Navy. There’s a picture of a lot of possibles that come with it as well. There’s also a picture of my father hunting with it, with my second daughter. She has fond memories of him so don’t tell her I’m selling this rifle. She has plenty of guns and she will never shoot it.

I have no idea the true value of it so I will start it at 500.00. That could be too much or not enough. So let’s be fair. Most any offer will be considered. If I knew a kid that REALLY wanted a muzzleloader to shoot, I would just give it to him.

Money order will work or even a check if you are willing to wait until it cleared my bank. DO NOT ask me to break any laws. It’s not going to happen.
 

Attachments

  • IMG_1749.jpeg
    IMG_1749.jpeg
    2.3 MB
  • IMG_1630.jpeg
    IMG_1630.jpeg
    469.4 KB
  • IMG_1744.jpeg
    IMG_1744.jpeg
    2.1 MB
  • IMG_1747.jpeg
    IMG_1747.jpeg
    2 MB
  • IMG_1746.jpeg
    IMG_1746.jpeg
    2.4 MB
  • IMG_1743.jpeg
    IMG_1743.jpeg
    1.3 MB
Last edited:
Some of these have a stock with little drop and designed to accomadate scopes. Does this one come up so that one is looking through the irons without having to scrunch down?
 
Some of these have a stock with little drop and designed to accomadate scopes. Does this one come up so that one is looking through the irons without having to scrunch down?
I threw it up to my shoulder. My cheek rested comfortably. If you want a scope on it, you would need to put a pad on it. And drill and tap for it.
 

Attachments

  • IMG_1752.jpeg
    IMG_1752.jpeg
    1.5 MB
  • IMG_1751.jpeg
    IMG_1751.jpeg
    1.6 MB
Last edited:
So would this be twisted for conical bullets or for round balls? Or either?
It is for round balls as the manual it has only has a loading table for round balls (picture attached). In the possibles picture there are some patches that he purchased to go my route with patched balls. He didn’t believe they were big enough for elk. So he started shooting maxi balls. They seemed to shoot well enough.
I absolutely hated that maxi ball load. It kicked like a mule. I hated it.
 

Attachments

  • image.jpg
    image.jpg
    2 MB
It is for round balls as the manual it has only has a loading table for round balls (picture attached). In the possibles picture there are some patches that he purchased to go my route with patched balls. He didn’t believe they were big enough for elk. So he started shooting maxi balls. They seemed to shoot well enough.
I absolutely hated that maxi ball load. It kicked like a mule. I hated it.
i think if you go a page or two there will be maxi ball loads also in the manual.
 
Back
Top