that was a good thing! you didn't have to put up with each other for an extended period of time! now I know the rest of the story? thanking you for that explanation of it. makes perfect sence!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
What do I have here?
- Thread starter woodsnwater
- Start date
Help Support Muzzleloading Forum:
Enough, methinks.
woodsnwater
40 Cal
I talked to Mr. Shaver. He wasn't familiar with the gun but said there shouldn't be an accuracy problem, just don't let anybody stand to my right when I shoot. 
Pretty cool guy. I believe he told me he just shot the first muzzle loader 1000 yard perfect score. If that's not true I probably heard him wrong.
Pretty cool guy. I believe he told me he just shot the first muzzle loader 1000 yard perfect score. If that's not true I probably heard him wrong.I was married once a long time ago. Death parted us and I was what was left. I haven't seen fit to marry again for many reasons.
excess650
50 Cal.
- Joined
- Nov 25, 2009
- Messages
- 1,671
- Reaction score
- 635
If you're going to shoot that rifle with .100" vent, you'd better buy some fg so all of your powder doesn't blow out of the vent when loading. fffg will trickle out of .070" and I would never shoot a flintlock with a vent larger than that.
woodsnwater
40 Cal
Good point but I have to at least try it.
Mantihunter
32 Cal
- Joined
- Feb 5, 2021
- Messages
- 34
- Reaction score
- 32
They say you never know what true happiness is until you're married...then it's too late.
appalichian hunter
75 Cal.
- Joined
- Oct 28, 2018
- Messages
- 5,828
- Reaction score
- 9,474
One would think after one you would learn your lesson, I have been married for 46 years same boss, hope she out lives me. but if not, I would probably have another woman around just not married, give her a box not to big not to small, when she asks what's that you tell he all her stuff must fit in that box, her next question will be why, tell her that way when you come home one day, and your box is on the porch just pick it up and leave. Never give her a drawer or closet or house key they then become just like a stray cat and will not leave.
MrMackc
40 Cal
56 years, same here. I don't know if you get "used to putting up with it" or maybe just get "numbed to it"i've been married 56 years, how much more hard time do i have to put up with?
user 34300
54 Cal.
- Joined
- Nov 25, 2019
- Messages
- 1,744
- Reaction score
- 2,125
Is the vent stepped, large on the outside and smaller inside??
IF it is as large as suspected then it really needs a liner. It is a milling machine job to move the hole.
IF it is as large as suspected then it really needs a liner. It is a milling machine job to move the hole.
- Joined
- Feb 2, 2021
- Messages
- 733
- Reaction score
- 641
If the vent hole is that small it should be ok. Can you take a better pic from the side to we can see the placement of the vent?
woodsnwater
40 Cal
The hole is.095-.100 and it isn't stepped. I'm going to shoot it this weekend and see what happens.
- Joined
- Mar 13, 2020
- Messages
- 7,437
- Reaction score
- 20,798
- Location
- On the Border in Idaho looking at BC
Vesuvius this weekend guys! watch for it! stand on the left
woodsnwater
40 Cal
That’s funny.
Check this pic out. If I just drill this hole out and install a liner with a 1/16 hole do you think it will be high enough off the pan?
The touch hole appears low. You may have to take your rifle to a gunsmith with muzzleloading experience and a mill to drill the hole for the new touch hole liner.
- Joined
- Mar 13, 2020
- Messages
- 7,437
- Reaction score
- 20,798
- Location
- On the Border in Idaho looking at BC
looks to me like you would be below the next flat with part of the new liner if you used that hole as your pilot hole.
if you are good with a drill press and got some diamond hole saws you could bring it back up using a 4mm saw. that would give you enough meat for threads and then some. 1/4 inch liner needs a 13/64th hole for good threads.
you probably would be money ahead to take it to a muzzleloader smith like Grenadier1758 suggested.
if you do it yourself it is a satisfying experience. but the chance of upscrewing is there. don't ask how i know.
if you are good with a drill press and got some diamond hole saws you could bring it back up using a 4mm saw. that would give you enough meat for threads and then some. 1/4 inch liner needs a 13/64th hole for good threads.
you probably would be money ahead to take it to a muzzleloader smith like Grenadier1758 suggested.
if you do it yourself it is a satisfying experience. but the chance of upscrewing is there. don't ask how i know.
woodsnwater
40 Cal
I didn’t think about going past that land deerstalkert. Very good advice thank you
- Joined
- Mar 13, 2020
- Messages
- 7,437
- Reaction score
- 20,798
- Location
- On the Border in Idaho looking at BC
i just salvaged a Green Mountain barrel someone drilled the touch hole too close to the breech face and too low on the flat. was able to drill above and forward enough to get it right. take your time and you can do it with the right tools. don't try it free hand.
- Joined
- Dec 13, 2004
- Messages
- 108
- Reaction score
- 205
If you think the flash hole is located a little too close to the bottom of the pan, a simple solution is to remove the lock from the gun and use a Dremel (or other rotary tool) with an abrasive cylinder to grind away a bit of the pan floor and polish it. This is an efficient, quick fix that avoids having to monkey around with the flash hole itself. Good luck.
MrMackc
40 Cal
Don't do anything to the rifle until you go shoot it several times, It may be okay, "Don't make a new lever b-1 until you find out that you can leaver her be."
