I got Tow! Think I'm going to help some fellas out cause I got more than I will need in my life time?
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Banjoman
Hillbilly
Got this in the mail,,,
- Joined
- Oct 6, 2020
- Messages
- 1,668
- Reaction score
- 2,767
- Joined
- Jan 21, 2021
- Messages
- 382
- Reaction score
- 992
I'm just spending another day pondering my next project. Choices are: Kibler's new fowler (easy peasy), 17c pistol (need custom bbl. & lock), Hudson Valley Fowler (50+" custom bbl. &lock), another rifle off a precarve I already have, or try again to buy back one of my old Hudson Valley Fowlers from the guy I sold it to. 'Great way to fritter away a cold windy day.
considering getting some of these conversion nipples for 209 primers.
It almost looks like you can get these conversion nipples for six guns.
https://shop.fortytwoguns.com/products/mag-spark-5158
It almost looks like you can get these conversion nipples for six guns.
https://shop.fortytwoguns.com/products/mag-spark-5158
ran an experiment when I got home.
been thinking all day at work how to pre-measure and store small amounts (15 grns) of fine powder for pistol.
I came up with using sealer on FoodSaver vacu-seal and straws.
filled with powder sugar as a simulation for 4f. sealed both ends and dunked in hot water for a few.
cut off one end and poured out unscathed. I now know what I'm doing from now on !!!!
now I gotta look to see if grocery store or other places have clear straws.
camo
been thinking all day at work how to pre-measure and store small amounts (15 grns) of fine powder for pistol.
I came up with using sealer on FoodSaver vacu-seal and straws.
filled with powder sugar as a simulation for 4f. sealed both ends and dunked in hot water for a few.
cut off one end and poured out unscathed. I now know what I'm doing from now on !!!!
now I gotta look to see if grocery store or other places have clear straws.
camo
Made the short starter for the SMR from a maple ball 12 gauge ramrod tip and an old broken ramrod
Great idea, just when plastic straws are being phased out!
- Joined
- Mar 13, 2020
- Messages
- 7,530
- Reaction score
- 21,148
- Location
- On the Border in Idaho looking at BC
put one last coat of tru-oil on the cherry stock early this morning.
one last browning treatment on the barrel, after 3 hours i carded the barrel and neutralized the agent.
right now the barrel is baking with oil to set the brown.
mounted most of the hardware. will give the barrel another hour or so and put it in the stock.
pretty piece of wood.
also worked over the new mainspring for the Hadaway lock seems to work great.
one last browning treatment on the barrel, after 3 hours i carded the barrel and neutralized the agent.
right now the barrel is baking with oil to set the brown.
mounted most of the hardware. will give the barrel another hour or so and put it in the stock.
pretty piece of wood.
also worked over the new mainspring for the Hadaway lock seems to work great.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
That’s a neat looking pouch. I say go back and get it. It’s only money
.
TDM
Cannon
- Joined
- May 28, 2022
- Messages
- 9,660
- Reaction score
- 24,236
- Location
- Louisiana & My camp in Mississippi
That is really turning out great. Beautiful color.
Got my gear together for tomorrow's woods walk. I fell last year, and lost my short starter. Found out today I lost more than just that. 
Daryl Crawford
50 Cal.
Well if you forgot my address, just ask... I can remind you! ; )
In seriousness, I helped an old friend frame out his new cabinet shop. What does that have to do with muzzleloading? I'm going to have access to it and all it's industrial grade toys. Lathe work here I come! Plugs for powder horns? Yep I can do that. A cup lathe? Yep, I've got access to that. Etc, etc. He made a bargain with me, that really is a bargain for me.
Psycho Mike
Free Cdn
Had a little delivery from Middlesex Village Trading Co. today...I have a nice, new spring vise for working on my Colonial.
Going to have to raid the photocopier waste toner tank tonight for some "carbon" and the art supplies (small paint brushes) from the ladies in the house so I can make a homemade Prussian blue to start fitting a barrel this weekend, I think
Perhaps in my running around tomorrow, I can make it out to Lee Valley and get my aniline dyes (I have test scraps now) or I'll have to start sketching out lines and carving the thumb "notch" for my patch box lid
Going to have to raid the photocopier waste toner tank tonight for some "carbon" and the art supplies (small paint brushes) from the ladies in the house so I can make a homemade Prussian blue to start fitting a barrel this weekend, I think
Perhaps in my running around tomorrow, I can make it out to Lee Valley and get my aniline dyes (I have test scraps now) or I'll have to start sketching out lines and carving the thumb "notch" for my patch box lid
Don't worry about whether or not it counts because most of the people on here can't count past 17
got the forklift prongs on the tractor and now moving the cross tie piles around to get them into position for the bullet trap that is going to be built in them.
Your powder horn looks greatFinished making a Powder Horn, which I am pleased with
dangggg. never seen that before. thanks for posting
- Joined
- Oct 6, 2020
- Messages
- 1,668
- Reaction score
- 2,767
Similar threads
- Locked
