What Muzzleloading Stuff Did You Do Today?

[Terrier]

@Terrier
Any news on TDM?

I haven’t heard anything back. One of the other members here is going to personally check on him.

 

[Rob M.]

I bed a 45" , 20/ga. barrel into its cherry stock blank ... Worse part of the job is done !

 

[Rob M.]

Got the Breech bedded/ inletted ...and stock , slabbed off bottom under barrel position ...will cut R.R. channel then drill R.R. hole from there ...

 

[Gordoncourtney]

Drilling the nipple holes 28bore barrels. I pondered at setting it up on the mill but then made a drill jig out of tubes and epoxy putty. . So it all lined up with hammers perfectly. Still waiting for epoxy putty to harden . I used hot glue to secure the tubes exactly to the hammer face , before adding epoxy putty Sunny day west London 12 am

So that did not work I’ll make two more breach plugs. However , meanwhile I experimented with a bit more milling and now a new drill tube and I think I have the geometry right Even at 81 it’s still a learning curve , I held the drill tube in place with bonding resign. Next some drilling

 

[Loja man]

Had a great time over the weekend at friendship, Indiana! Weather was absolutely beautiful! This year, my three oldest sons came with me, the youngest stayed home with Mom! This is the first time the boys made it back since spring of 2023! Ethan had a third place metal for his age division at the primitive range! Matthias had a third place medal for his age in the Shawnee harvest hunt woods walk with traditional bow! He even had a higher score than the three older shooters pictured with him!
This year they had a great time shooting traditional bows again! Matthias had a higher score this year than last time, he’s hoping for another medal! He was also shooting with his very own Osage character bow that he bought with money from selling bow staves! Ethan didn’t do quite as well At the primitive range with his cap lock!:-( He moved up an age division so he had to shoot at the 30 yard targets freehand. He had four out of the five shots on a rabbit sized bear target! My third son Titus shot awesome for a sub youth competition at the primitive range! He got to use a rest! Hoping he gets a metal and maybe wins a free rifle! ;-)
They also got to shoot at trap with black powder shotguns! The two older boys hit thire bird! My third son Titus was struggling just to keep the shotgun pointed the right direction! He will get thier!!
Then our last day the four of us did the Woodwalk! I was using my 45 flintlock and the boys were using 50 Cal percussion!

 

[awreis]

This was yesturday but went to Friendship with my older brother and took along my 2 yr old son. Didn't do any shooting but did stock up on a few things and window shopped at some nice rifles. My son did pretty good as long as he had a bowl of gold fish to snack on but by 1 he was falling asleep standing up so we headed home after getting a bite to eat.

 

[Gordoncourtney]

So that did not work I’ll make two more breach plugs. However , meanwhile I experimented with a bit more milling and now a new drill tube and I think I have the geometry right Even at 81 it’s still a learning curve , I held the drill tube in place with bonding resign. Next some drilling

At last I got the geometry of the nipple hole right , but what a mess. The nipple hole is quite off set. The whole thing has been an utter pane Now I’ll start all over again now I know what I am doing. Back to big lathe

 

[David Austin]

Still filing on the .50 cabellas barrel....it's not filing out. the warning is out now and the 0 from the 50 is a half 0. everything elsr is gone. Played with my USA mountain rifle stock...again. Got out the CVA Kentucky and admired the lines...I like this gun...don't like the cracks in the stock.

 

[Rob M.]

Got the breech bedded in the stock , slabbed off at bottom of the stock , slabbed off the lock plate side along the barrel , chiseled in the ramrod channel , drilled R.R. hole in forearm ....gettin there ...

 

[wiscoaster]

Shooting the Navy Arms / Miroku Charleville. Two objectives: 1) more practice with bipod shooting stick, 2) try 0.678 balls. Shooting today was with 80 gr 2F Swiss, dry tow over powder and lubed tow over bare ball.

Shooting sticks practice went well. Tow wadding worked well. 80 gr load worked well.

I only had four of the recommended 0.675 balls left, which was the reason for goal #2. The larger balls loaded and shot fine, but were extremely tight down toward the breech while ramming, which fact puzzles me as to why, and so required extra attention and effort to make sure those loads were completely and properly seated. I didn't notice any differences in POI between the two ball sizes. My conclusion on trying the larger balls is that I will get more of the 0.675 balls as they are easier to firmly seat into the breech.

 

[David Austin]

Still filing on the .50 cabellas barrel....it's not filing out. the warning is out now and the 0 from the 50 is a half 0. everything elsr is gone. Played with my USA mountain rifle stock...again. Got out the CVA Kentucky and admired the lines...I like this gun...don't like the cracks in the stock.

Success. Rust was only skin deep. Stamping gone. Trying out homemade iron browning. seems to work

 

[8Ball]

Just signed for a package this morning... .36 cal. Happy camper here!