Yup. BP and subs need PAL. Caps too.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Whats Everybody Doing?
- Thread starter yonderin
- Start date
Help Support Muzzleloading Forum:
PAL?
In Canada you need a Possession and Acquisition License to own firearms.
With all of the regs up there I'm surprised you guys like cap guns. with my flinter I jut have find a rock that sparks and will fit my lock. As for powder there are plenty of videos on how to make it. There is one guy who uses toilet paper for charcoal, and according to his chrono gets better performance than using Swiss.
Yup I get the feeling they really don’t want us armed for some reason.
Psycho Mike
Free Cdn
Well, up until the spring we could get black powder without....but I guess too many idiots found that out and were using to blow manure up, so the Natural Resources folks decided you need either a PAL, an Explosives permit or a Municipal Exemption form to get black. Hence the need to do that again.
rumor has it that your French poofter PM is the spawn of Fidel Castro, probably raised like Blowbama was, always hating freedom.
Rough night last night. Having a smoke at two in the morning and heard something around the corner of the garage. Didn't investigate as I figured I knew what it was. Sure enough this was left.
Fairly common to have them wander into the neighborhood.
Fairly common to have them wander into the neighborhood.
ArmorerRoy
40 Cal
- Joined
- Nov 14, 2010
- Messages
- 1,166
- Reaction score
- 1,546
Any body heard what powder prices are gonna be this year or next in Alberta .
Haven’t heard but Schutzen seems to be the only powder available.
Psycho Mike
Free Cdn
I'll let you know what they are when I order up some (once I get my PAL again...didn't need it forever and a day for flinters, now we do for powder...sheesh).
Last time I was digging, Schutzen was the only one folks had stock of. Considering I've got a little original Goex left, that might not be a bad thing for me (I hear the performance is fairly similar). Swiss sounds interesting, but if we can't get it consistently, then... :/
Last time I was digging, Schutzen was the only one folks had stock of. Considering I've got a little original Goex left, that might not be a bad thing for me (I hear the performance is fairly similar). Swiss sounds interesting, but if we can't get it consistently, then... :/
old ugly
40 Cal.
ive used schutzen and Geox. they work fine.
still have some left after the liquidation sale.
still have some left after the liquidation sale.
- Joined
- Nov 14, 2010
- Messages
- 1,166
- Reaction score
- 1,546
Yeh but you can’t buy the ingredients up hear any more and I’m not sure if you can have them shipped.Thanks to our liberals
Psycho Mike
Free Cdn
OU, if I scrounge up a few more dollars, I may grab that Schutzen (2F, right?) and more lead from you ( though I may have to save up for that fowler )
As for me, tonight I did a swack of .58 cal rb (close to 160 ladled out ladled, though I got some lead in the "seal" of my barrel mold, so I lost about 10% in my qa/qc work....will have to clean it out and re-soot it afterwards). Definitely something to be said about casting your own...consistency! I'm hitting 275+/-1 grains on my rb's (.569 as I like thicker patching with slower twists).
)As for me, tonight I did a swack of .58 cal rb (close to 160 ladled out ladled, though I got some lead in the "seal" of my barrel mold, so I lost about 10% in my qa/qc work....will have to clean it out and re-soot it afterwards). Definitely something to be said about casting your own...consistency! I'm hitting 275+/-1 grains on my rb's (.569 as I like thicker patching with slower twists).
Where are you seeing this? I was just on the NR governs site and it says nothing about a PAL
https://natural-resources.canada.ca...buying-selling-and-storing-black-powder/15916
If you need to possess a PAL to buy black powder it would be pretty detrimental to the reenacting community
I’ve had to show mine any time I purchased at a retail outlet.
That’s wild
I’m in southern Ontario and all I’ve ever had to show was I.D with proof of age
Maybe I just show it anyway, can't recall if they ask. I have purchased T7 powder online from Ontario and had to show it.
Psycho Mike
Free Cdn
Scroll further down...under identification...
"Identification
Before selling black powder to a buyer, the seller must require the buyer to provide their:
licence issued under the Firearms Act; or,
valid fireworks operator certificate — pyrotechnician; or
in the case of a buyer buying on behalf of a public service agency, the public agency identification number assigned under the Public Agents Firearms Regulations."
