• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What's wrong with this picture?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This is scary. Is there anyone brave enough to fire this rifle without a long string and a stout tree? Semper Fi.

View attachment 235969

View attachment 236007
If it goes through, is under the breech plug thread and did not breakthrough into them it is probably sound.
I would not trust it if it passed under the bore with less barrel steel left between hole and bore than what a dove tail uses up , roughly .090 deep for the male in a rear sight from the factory.
If one thinks about it a drum drilled and tapped into the barrel wall is probably weaker than the stock bolt under passage. I definately would take it apart and do some careful measuring and inspecting before firing it. The other caution is if the barrel is made of 12L14 or 1134. I would never trust the former !
 

Latest posts

Back
Top