You and me both. I used to drive my Ma crazy trying to make sounds like Michael Winslow.
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
You call that a rifle.
- Thread starter EC121
- Start date
Help Support Muzzleloading Forum:
Gtrubicon
50 Cal.
- Joined
- Jun 19, 2021
- Messages
- 1,341
- Reaction score
- 2,297
That dude was incredible.
ChuckJonesWagon
40 Cal
So....what's that take for a load? Like a pound of FF for each shot?
- Joined
- Jul 8, 2019
- Messages
- 2,183
- Reaction score
- 3,831
Could you take a picture of the whole rifle? I would like to see what size wheels it has! LOL!
That'll knock your fillings out!
sportster73hp
45 Cal.
- Joined
- Jan 16, 2020
- Messages
- 972
- Reaction score
- 744
I wanted to build a rifled 75 but didn’t know where to get the barrel. A friend special ordered a rifled 69 caliber. Took 6 months to get it.
Didn't someone post a Brontosaurus killer on here a while back. If I recal it was a rifled barrel with a bore close to 1 inch. like .950" or something like that. I think the fella said the charge was like 200 grains. Aww, heck lets just call up Hern and get us a Mountain howitzer barrel and fit it to a stock. 
Gonna need a lot of powder
Didn't someone post a Brontosaurus killer on here a while back. If I recal it was a rifled barrel with a bore close to 1 inch. like .950" or something like that. I think the fella said the charge was like 200 grains. Aww, heck lets just call up Hern and get us a Mountain howitzer barrel and fit it to a stock.
The 4 bore rifles were the elephant guns in the black powder muzzleloader era. There were some two bore monster guns made too. But the recoil off of these big 2,4,6 bore guns was very abusive to the shooter. I would bet many a shooter hit concussions and injured shoulders firing them. Many were single shot too as they weight a lot. So you have an elephant charging you and you have a single shot and all of your porters fled long before then. Don’t miss.
https://en.m.wikipedia.org/wiki/4_bore
Seleous with his single shot 4 bore circa 1876.
https://en.m.wikipedia.org/wiki/4_bore#/media/File:YoungFCSelous.jpg
Thread about a two bore here:
https://www.muzzleloadingforum.com/threads/very-interestin-2-bore-muzzleloader.76710/
- Joined
- May 28, 2021
- Messages
- 496
- Reaction score
- 497
That's getting on the edge of a crew served weapon!!
You couldn't pay me to shoot that monster.
In my youth, sure I'd have begged to shoot it.
Thing would knock me to the ground
In my youth, sure I'd have begged to shoot it.
Thing would knock me to the ground
Thomas Simpson is famous for building Gasper Mansker's rifle (some will remember Mansker's Station). Frank House is a devote of Simpson's style.
Sign me up, I'll shoot that bad-boy!
I'm in for sure. At 300 lbs I'll manage. My go to gun is .338 or .58 BP
It's a big rifle for sure.
Now to show my ignorance. How much more recoil would it have compared to a Brown Bess? 50 cal is the biggest muzzle loader I've fired. Does the rifling add that much more to the recoil? Inquiring minds wants to know.
Now to show my ignorance. How much more recoil would it have compared to a Brown Bess? 50 cal is the biggest muzzle loader I've fired. Does the rifling add that much more to the recoil? Inquiring minds wants to know.
Big bore rifles are much fun to shoot if built right !!
Over 60 some years I used mostly original big bore English & European rifles in competition & hunting.
The barrels on these big bore rifles in the .60-.75 cal. range had deeper rifling of .014-.018 to grip PRB well & usually featured twist of one turn in length of the barrel. The above barrels rarely required more than 80 grains of 2f to obtain match grade accuracy.
The rifling depth on most modern mfg. muzzleloading barrels are cut too shallow in the .008 range to properly grip a PRB so they use a much longer rate of twist & use much higher charges.
My favorite target & hunting rifle for about 4 decades was an original .70 Danish Jaeger that weighed just 7 1/4 lbs, it produced ragged hole @ groups @ 50yds if I did my part.
Additional bonus, didn't need spotting scope to see holes on paper
Over 60 some years I used mostly original big bore English & European rifles in competition & hunting.
The barrels on these big bore rifles in the .60-.75 cal. range had deeper rifling of .014-.018 to grip PRB well & usually featured twist of one turn in length of the barrel. The above barrels rarely required more than 80 grains of 2f to obtain match grade accuracy.
The rifling depth on most modern mfg. muzzleloading barrels are cut too shallow in the .008 range to properly grip a PRB so they use a much longer rate of twist & use much higher charges.
My favorite target & hunting rifle for about 4 decades was an original .70 Danish Jaeger that weighed just 7 1/4 lbs, it produced ragged hole @ groups @ 50yds if I did my part.
Additional bonus, didn't need spotting scope to see holes on paper
- Joined
- Jul 8, 2019
- Messages
- 2,183
- Reaction score
- 3,831
Go to a local Plumbers store they have pipes of all sizes! LOL!
Might as well try a buckshot load of 50cal round balls. Just for sh** and giggles.
