• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

Shop deals on ebay
L & R
shop deals on amazon
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    recs for new sights on CVA Mountain Rifle

    I have only just had fitted a T/C click adjustable rear sight and front sight to match to my CVA Mountain rifle and is a big improvement to the primitive sights it came with. Had to drill and tap the barrel to fit the T/C sight. Rick
  2. R

    #10 vs #11 nipple on my Traditions.

    I would first try replacing the nipple with the correct type as you dont know if someone has replaced it with the incorrect type, or slightly crush the no. 11 cap so it will be a tighter fit. I used to have to do this with a 1858 Rem Rick
  3. R

    Cleaning Barrel

    Would cleaning your barrel after shooting using fine steel wool same type as used in the kitchen wrapped around a jag or a bronze brush when using hot soapy water be ok to use or not, or would it be to harsh for the barrel and end up removing the edges of the rifling.
  4. R

    Split Nipple

    Arcticap, I have checkout the picture and that was not my problem, but you can see that would cause damage to nipples for sure, I fitted a new nipple shot around 30 shots from it and works like a dream now. Have just also have had a few Hot Shot nipples from the US sent over here will try them...
  5. R

    T/C Silent Ball Discharger

    Thanks again roundball that answers my question as I've seen them on ebay but they dont mention what is used with them to remove the ball. May be worth looking into getting one.............
  6. R

    T/C Silent Ball Discharger

    I've seen these T/C Silent Ball Discharger on the internet for sale and would like to know what actually is used to propell the ball from the barrel, and also what they are like to remove the ball rather than using a bullet puller. Rick
  7. R

    TC rear sight

    Thanks for the good info as this has helped me alot now what to do, I think I may go to TC rear sight which I can pick up new on ebay for $20 USD which is alot cheaper than what they are here in Australia for around $60+ AU
  8. R

    TC rear sight

    roundball, I've just checked out the Brownell's site and found the Williams sights they are called "WDOS" open sights and looks like the way to go about it rather than drill and tap the barrel. Will look at seeing if they would be interested in shipping to Australia. :thanks:
  9. R

    TC rear sight

    ok thanks roundball for the info as i was not sure how the were fixed to the barrel, so I would the have to drill and tap barrel to mount the TC sights.
  10. R

    TC rear sight

    Could anyone please help me as I would like to know if a TC rear sight click adjustable type will fit on a CVA mountain rifle which has a primative type sight which has a 3/8 dovetail sight base, as i would like to change over to a TC sight on my CVA. Rick
  11. R

    Split Nipple

    Thanks guys, I think you are right it's a fault in during production that caused an imperfection or weakness. I will look into buying a few Hot Shot nipples for the US, will look around on ebay to find some, as here in Australia we dont a big selection when it come to muzzleloader accessories...
  12. R

    Split Nipple

    I took my brand new Tradition's Hawken to the range today and only fired two shots shots from it found that when I went to fire the third shot I only had miss fires from it :(, on further inspection I found the nipple had a split all the way down. Anyone know the reason for this why it lasted...
  13. R

    Which Minie mold to buy?

    Thanks walruskid for that info it will be getting that mold today and soon cast them out and try them out.....the best part. cheers Rick
  14. R

    Hi from Down Under

    Hi all, Just recently joined the forum and looks like a great one, have been shooting muzzleloaders for a a little while now and lovin it..........
  15. R

    Which Minie mold to buy?

    Hi all, this is my first post here and what a great Forum....I'm looking at buying a minie mold for target shooting in a 1:48 twist barrel and unsure which mold to buy between the Improved Minie Traditional Design or the Modern Minie Target Design which claims to be most accurate, both made by...
Back
Top