“Dry ball”

[ceb427]

Well ladies and gentlemen I’ve done it for the very first time I dry balled my .50 Hawken after someone asked me a question at the range I guess I’m going to take out the nipple and jam as much powder as I can in there and try and blow it out as I’ve never dealt with this before

 

[Grenadier1758]

That's the easiest for most of us. Only takes about 5 grains of powder to remove the ball. Get it done quickly or we will be filling about 20 pages of methods that may or may not work or removing a dry ball.

You've joined the club that most of us belong to.

 

[wiscoaster]

The grease gun method works pretty well with percussion guns. Don't ask me how I know.

 

[ceb427]

Ok guys I got it out first time it pushed the ball half way up the barrel I was able to funnel some more powder in the hole and reseat the ball and blow it out was a lot less horrible than i anticipated whole process took maybe 20-25 min

 

[kh54]

Congratulations on both achievements!

 

[stubshaft]

Just have to remember that the NEXT time it happens. : )

 

[French Colonial]

Ok guys I got it out first time it pushed the ball half way up the barrel I was able to funnel some more powder in the hole and reseat the ball and blow it out was a lot less horrible than i anticipated whole process took maybe 20-25 min

I am with Grenadier...Thank god you posted you got it out! Or we would be reading posts about this for a week.

 

[Howard Pippin]

Really, since I'm long time retired, I enjoy reading all the posts that would have come up if this would have ran on. Of course we've seen all the messages I suppose there are but it's better than reading some of the stuff that's in the papers, sometimes sometimes somebody brings up something new.

 

[LME]

Well ladies and gentlemen I’ve done it for the very first time I dry balled my .50 Hawken after someone asked me a question at the range I guess I’m going to take out the nipple and jam as much powder as I can in there and try and blow it out as I’ve never dealt with this before

You are not the first nor the last one to dry ball a M.L.! I have yet to do it but I did break off a jag once. I put a little priming powder through the the vent hole and shot it out. I was taken back at how little powder it took? Good luck!

 

[Brokennock]

That's the easiest for most of us. Only takes about 5 grains of powder to remove the ball. Get it done quickly or we will be filling about 20 pages of methods that may or may not work or removing a dry ball.

You've joined the club that most of us belong to.

Ok guys I got it out first time it pushed the ball half way up the barrel I was able to funnel some more powder in the hole and reseat the ball and blow it out was a lot less horrible than i anticipated whole process took maybe 20-25 min

I am with Grenadier...Thank god you posted you got it out! Or we would be reading posts about this for a week.

Do you guys really think that the problem being solved,,, and it being posted as having been solved,,,, will stop the suggestions coming in, to include the anti-greasegun protesters?

Unless a Mod decided, "oh, problem solved, let's lock the thread," and does so, there will be incoming suggestions and retorts...
To include a thread resurrection in a couple years.

 

[Brokennock]

Ok guys I got it out first time it pushed the ball half way up the barrel I was able to funnel some more powder in the hole and reseat the ball and blow it out was a lot less horrible than i anticipated whole process took maybe 20-25 min

I am glad you got the situation taken care of.

 

[45man]

My friend in town told another friend he never dry balled, well the next time he came to shoot he did it twice and nobody was talking to him at the time. I have a good puller so it was easy to remove the balls. If you shoot a front stuffer, it is going to happen sooner or later.
I did it deer hunting once!

 

[maillemaker]

A CO2 discharger like this is a handy tool to keep in your range bag:

https://logcabinshop.com/oc30/index.php?route=product/product&product_id=24787

If you buy one that takes 12oz or 16 oz co2 bottles get the bigger ones.

 

[Snooterpup]

Well ladies and gentlemen I’ve done it for the very first time I dry balled my .50 Hawken after someone asked me a question at the range I guess I’m going to take out the nipple and jam as much powder as I can in there and try and blow it out as I’ve never dealt with this before

Welcome to the non-exclusive club! Those really pointy collared ball extractors from Track O’ das Woof work very well. Do not use anything that is not collared to your correct caliber size and always use a strong non-wood range rod to remove a dry or stuck ball. Removing the nipple and putting powder in the flash channel and shooting it out is always the best first try.

 

[Okie Hog]

guys I got it out first time it pushed the ball half way up the barrel I was able to funnel some more powder in the hole and reseat the ball and blow it out

i,m glad it worked.

 

[Boomerang]

The best way to get one out is to take the breech plug and nipple out, poor in some powder, pump in some grease, screw in your ball puller and shoot it out with a co2 dispenser!
I thought everyone knew that!