British Light Sea Service Dragoon project !
- Thread starter BCWILL
- Start date
Help Support Muzzleloading Forum:
Yep just keep finding things to do…
Locks all back together….functions way better, lightened up all the springs, polished the contact points, and reworked the sear & notch abit ! Runs quite abit smoother now and the trigger doesn’t need two fingers
to pull !
Just gonna tidy up the pan abit, the hollow is abit off…..
Locks all back together….functions way better, lightened up all the springs, polished the contact points, and reworked the sear & notch abit ! Runs quite abit smoother now and the trigger doesn’t need two fingers
to pull !
Just gonna tidy up the pan abit, the hollow is abit off…..
So how are the touch ups going? Did you get it where you want it? Fired it yet? I was avidly following the thread and am interested in anything else you wish to share!
Getting there ! Work gets in the way most times! lol
Just getting going on the lumber now…locks tuned as good as I’m gonna get it !
Actually Found a replacement entry pipe (cast from original) had to come from England !! Looks way better then the brass blob it came with.
Should allow me to thin up the front stock abit and look much better
It will get rid of this bulky belly….and give a more slender look like the originals!
Gonna have to fill the old hole for the pipe pin though ! The factory one is drilled at a 45 and just won’t work with the correct entry pipe ! lol
What a Mess…..
I’ll definitely keep posted with the woodwork as I go !
Thanks for the interest
Last edited:
I see what you mean about the brass blob.
On mine, one of the barrel lug pins was bent. It's good you're paying attention to the details. The builders in India I think were a little lax on paying attention to the details in order to get as much production as possible out the door for as little time and expense as possible. So it's on us, as well as on people like Loyalist Arms and Veteran Arms to improve on that sloppiness. With a little time and work, a really nice firearm can be the result.
FlinterNick
69 Cal.
- Joined
- Nov 1, 2018
- Messages
- 3,897
- Reaction score
- 2,929
So with the current prices of original Light Dragoons these days….especially ones in shootable condition!!!
I’ve went with an Indian copy.
1st impressions outta the box it’s actually not too bad…exceeded my expectations. Feels good/points well enough….and from a few feet away looks pretty legit to an 1821 pattern light Sea Service pistol !
Finish is pretty rough in places but decent in others. The 2 main differences from an original, it uses only one barrel pin, originals have 2(rear one nonexistent on this) and the entry pipe is not even close appearance wise(I think they must be using the same ones for numerous guns) it’s actually the crudest thing cosmetically on the whole pistol….really quite terrible.
Lock is functional and actually throws a decent spark. (Definitely needs some tlc though) trigger pull is pretty stiff…and the trigger shape is pretty far from originals.(another case of one part for multiple guns I’m thinking)
Barrel measures 1” at the breach & tapers to .875 at the muzzle. Barrel thickness at muzzle .098-.1” Bore measures .632 !
Weighs 3 lbs 2ounces
Wood is obviously not walnut but is shaped decent enough…inletting is passible. Hopefully i can clean most of it up to serve as a decent shooter and passable replica !
….we’ll see about that
Cool project, but curious as to how you came up with the name of it.
British Light Sea Service Dragoon Pistol.. you took almost every name in the British pistol index.
Now if you had calle dit a “Land Pattern” Sea Service Pistol that would be hysterical
Yes I suppose that would beCool project, but curious as to how you came up with the name of it.
British Light Sea Service Dragoon Pistol.. you took almost every name in the British pistol index.
Now if you had calle dit a “Land Pattern” Sea Service Pistol that would be hysterical
But “Light Land Pattern Sea Service Dragoon Pistol” sounds better
Explained back on page one…..
BCWill wrote….
“….That’s actually how the pistol was listed for sale when I bought it so I titled the thread that way….surprised it took this long for someone to catch it
….”
Last edited:
Last bit of metal work finished up….
Before…
After…..
Not perfect but certainly better
Filled the cockeyed pin holes….shouldn’t be too noticeable once the finish is all done.
Now to get to work thinning down those lock panels and that forend !!!
Before…
After…..
Not perfect but certainly better
Filled the cockeyed pin holes….shouldn’t be too noticeable once the finish is all done.
Now to get to work thinning down those lock panels and that forend !!!
Got the brass pomel fit quite abit better too
Why don't we stop ragging this member on his choice of wording for a thread title. He's obviously engaged in a worthwhile project and doing well at it. Better to support him in that project than to nit-pick on some thread titling, WHICH HAS ALREADY BEEH ADEQUATELY EXPLAINED for those who even bothered to read the entire thread.
SHEESH
Last edited:
FlinterNick
69 Cal.
- Joined
- Nov 1, 2018
- Messages
- 3,897
- Reaction score
- 2,929
He was ok with it, get over it
FlinterNick
69 Cal.
- Joined
- Nov 1, 2018
- Messages
- 3,897
- Reaction score
- 2,929
Got the brass pomel fit quite abit better too
View attachment 356368
View attachment 356369
View attachment 356370
View attachment 356371
View attachment 356372
Nice work
Getting there !!! 
Just laying out the lock panels….they are certainly “generous” in size and need abit of reducing.
The worst area is the rear where they run down into the grip….makes it very uncomfortable to hold.
Both sides create big lumps that sit right in the web of the hand….
Not comfy at all……
Just laying out the lock panels….they are certainly “generous” in size and need abit of reducing.
The worst area is the rear where they run down into the grip….makes it very uncomfortable to hold.
Both sides create big lumps that sit right in the web of the hand….
Not comfy at all……
Certainly feels much better in the hand now……
Novice question: how did you go about removing the lumps in slimming down the grip? A file? Sanding?
Yep! Good old fashion files, rasps, sandpaper and elbow grease !
I pencil in things first…then ruff it out with a carving knife (it’s just faster for me this way) then files and such to finish !
Finally took the leap and draw knifed off the “belly” 
This step had me abit worried…..definitely was lottsa wood to play with under the ramrod channel/hole so it should work out okay!
Sure changes the profile from that low belly to more like it should be
Before…
After…
This step had me abit worried…..definitely was lottsa wood to play with under the ramrod channel/hole so it should work out okay!
Sure changes the profile from that low belly to more like it should be
Before…
After…
Very nice!
