- Joined
- Mar 16, 2024
- Messages
- 102
- Reaction score
- 98
I've seen the painting! But seeing the re-enactment is priceless!
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Caucasian Miquelet "Cossack" Pistol & Locks
- Thread starter cyten
- Start date
Help Support Muzzleloading Forum:
Sam squanch
69 Cal.
- Joined
- Oct 9, 2019
- Messages
- 3,171
- Reaction score
- 4,533
Rudyard, is that a Phillips head screw on that matchlock?!?!
- Joined
- Feb 28, 2019
- Messages
- 3,518
- Reaction score
- 4,482
Well they' look the part' every ones looks squiffy, The greatest compliment you can pay a reenactor is "You look the part".
Rudyard,s notion
- Joined
- Feb 28, 2019
- Messages
- 3,518
- Reaction score
- 4,482
Bit too unclear to see any screw head don t see a matchlock even ,I do see unusuall lock it the one clear view .... Cheers Rudyard
Yes the Matchlock its a phillips it wasnt so much' built' but knocked up in disgusting haste
heavy brute utterly unwieldy affair but it begged " make me " So I had to oblige (?) Good spotting So far I made one shot from it.
Regards Rudyard
Recently picked this priming flask up at auction. As Rick mentioned earlier, some people classify these as Persian, and they might be, but they show up FAR more often than Persian guns. I’ve seen these all over the Caucasus and a bit in the Balkans, made from metal or ivory/bone
Strangely, there was one on display in Western Tajikistan, along with a Khirimi rifle. I believe these were used during the conquest of Central Asia “Turkestan Campaign” as it was called in Russian. Many many units that fought were from the Caucasus.
Notice that the side plate has a slot for a vent pick
Strangely, there was one on display in Western Tajikistan, along with a Khirimi rifle. I believe these were used during the conquest of Central Asia “Turkestan Campaign” as it was called in Russian. Many many units that fought were from the Caucasus.
Notice that the side plate has a slot for a vent pick
MrTwelvette
32 Cal
At the risk of asking a stupid question, do these locks have a separate frizzen spring or does the main spring do double duty?
- Joined
- May 24, 2005
- Messages
- 5,479
- Reaction score
- 5,283
If you are talking about the Caucasian style miquelet locks, yes, they have a separate frizzen spring. The spring is just hidden behind what we call a fence.
Rick
- Joined
- Feb 28, 2019
- Messages
- 3,518
- Reaction score
- 4,482
A re run but eminently worth the running again .
Regards Rudyard
Regards Rudyard
- Joined
- May 24, 2005
- Messages
- 5,479
- Reaction score
- 5,283
Hi Cyten
Nice find with that flask. Looks to be in good, complete condition. Yes, collectors generally "suspect" this style of flask has Persian origins. But, as you mention, the basic style/function of this flask seem to show up everywhere in the Region. And, as you mention, they all turn up made in all iron or horn with iron mounts. I've never seen one using brass. I have one in my collection very similar to yours. Most of this style show up in what we call priming flask size. But occasionally one turns up in medium size.
That's the first example of one of these Caucasian rifle's side plate with a cut-out for a vent pick. Interesting. Again, thanks for posting.
Rick
Nice find with that flask. Looks to be in good, complete condition. Yes, collectors generally "suspect" this style of flask has Persian origins. But, as you mention, the basic style/function of this flask seem to show up everywhere in the Region. And, as you mention, they all turn up made in all iron or horn with iron mounts. I've never seen one using brass. I have one in my collection very similar to yours. Most of this style show up in what we call priming flask size. But occasionally one turns up in medium size.
That's the first example of one of these Caucasian rifle's side plate with a cut-out for a vent pick. Interesting. Again, thanks for posting.
Rick
Last edited:
- Joined
- May 24, 2005
- Messages
- 5,479
- Reaction score
- 5,283
OK. Now I've seen two also. LOL Thanks for the pics. Caucasian style weapon mounts typically show the use of iron, silver, horn, ivory/bone. The workmanship on their guns, blades, and accessories is usually top notch, and usually command a premium at auctions.
Conrad von Hotzendorf
32 Cal
- Joined
- Jun 19, 2020
- Messages
- 12
- Reaction score
- 12
As Bedford County Doc hinted at, that's a reenactment of the painting "Reply of the Zaporozhian Cossacks"
- Joined
- Mar 16, 2024
- Messages
- 102
- Reaction score
- 98
Thank you guys, yes I do make Circassian type rifles and pistols from time to time. In fact I shared the last pistol today. I can send it to the USA (as far as I know it is the only country that reaches it without any problems). However, I send it disassembled in two or three pieces (This is necessary to be able to get it out of my country, and it also reaches the recipient without any problems).
- Joined
- May 24, 2005
- Messages
- 5,479
- Reaction score
- 5,283
Hello Peserey
WOW !!! What a great job replicating a Circassian style pistol. Even the leather covered stock. The lock looks perfect. And the leather thumb piece, a nice addition. Just very nice job.
I've often wondered what the original purpose was for covering the wood stocks on some of these pistols with leather ? In the past I've handled a couple of these original pistols that still had their leather covering intact. They do make a very positive grip while aiming the pistol. Maybe that was it's primary purpose (?) It's certainly unique and decorative.
I wish I had known about you Turkish and Bulgarian craftsmen about 10 years ago. LOL
Stylistically, original Caucasian/Circassian guns are unique and light weight. They have always brought a premium at auctions.
Again, wonderful job. What material did you use for the ball-butt ?
Rick
WOW !!! What a great job replicating a Circassian style pistol. Even the leather covered stock. The lock looks perfect. And the leather thumb piece, a nice addition. Just very nice job.
I've often wondered what the original purpose was for covering the wood stocks on some of these pistols with leather ? In the past I've handled a couple of these original pistols that still had their leather covering intact. They do make a very positive grip while aiming the pistol. Maybe that was it's primary purpose (?) It's certainly unique and decorative.
I wish I had known about you Turkish and Bulgarian craftsmen about 10 years ago. LOL
Stylistically, original Caucasian/Circassian guns are unique and light weight. They have always brought a premium at auctions.
Again, wonderful job. What material did you use for the ball-butt ?
Rick
Hello Rick, thank you very much.
Unfortunately, there is no clear information about why it is covered with leather. If there is, I haven't found it yet. However, as you said, it may be a method used to facilitate grip and protect the wood.
And I used maple for the ball-butt.
Regards
Are you able to ship rifled barrels or only smoothbores? Importing into the US, I do not think it matters, but I assume other countries probably do not allow them.
Unfortunately only smoothbore, rifled barrels are strictly not allowed in my country.
Thats unfortunate but not surprising
