- Joined
- Nov 26, 2005
- Messages
- 5,247
- Reaction score
- 11,028
Hi Rat,Whoa...I had no idea Richard and Tfoley were that old. I must show more respect. (not sure which person Richard is?) Takes very little research to find just how popular shooting was, for fun, even as far back as the 1500's.
Okay Dave, I don't contest anything you are saying, but my question would still be, If Lyman can produce the Plains Pistol for $300, and get everything right on the nose cap/ram-rod/thimble thing, why can't Pedersoli do it for $800? I realize the nose caps are different on those guns, and involves a separate thimble...but...is it THAT hard, or expensive, to give the ram-rod a straight shot into the stock? I'm not talking tapered ram rods and under lugs, just a straight shot into the thimble, with the forward thimble inset into the under-lug. ??? Would you not just fit the nose cap first, then inlet the thimble to fit? As far as I know, nose-caps are not the most difficult part of building a pistol. Or....are they?????
I am not excusing Pedersoli for the poor nose cap fit. That is just lousy workmanship. My point is that they did not make an accurate copy of any original pistol simply because to do it right would result in a pistol costing a lot more than they charge now. Now then with Jim Kibler's CNC machining programmed to make a real dueling pistol, you might get close for a reasonable cost. The problem, however, is the lock. No commercial maker has a suitable English pistol lock. I had to build mine from cast parts by E. J. Blackley in England. They were copied from an original dueling pistol by Robert Wogdon. Wogdon was the maker of the pistols used in the Burr-Hamilton duel. I had to make all the springs and screws from scratch.
In 1783 a short poem was published in London about dueling, which included the following lines,
"Hail Wogdon! Patron of that leaden death
Which waits alike the bully and the brave".
dave