• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Fusil de Chasse , for fella in N.H.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sand curve till done , cut and trim up trigger , get trigger guard bend to correct shape ,spot holes ( a VERY small window for that front screw!!! ) , drill holes and counter sink ( &%$# guard is h@rd as h%## ! ) fit screws , line up front first , drill hole in wood for front screw and line up front final , screw down , line up again , trace finial ,..... Inlet front finial get it down first then we'll check out the rear and adjust it ....
 

Attachments

  • IMG_20230926_154028.jpg
    IMG_20230926_154028.jpg
    4.2 MB
  • IMG_20230926_173129.jpg
    IMG_20230926_173129.jpg
    3.8 MB
  • IMG_20230926_161204.jpg
    IMG_20230926_161204.jpg
    2.9 MB
  • IMG_20230926_154557.jpg
    IMG_20230926_154557.jpg
    3.2 MB
  • IMG_20230926_163849.jpg
    IMG_20230926_163849.jpg
    4.2 MB
  • IMG_20230926_164920.jpg
    IMG_20230926_164920.jpg
    3.2 MB
  • IMG_20230926_170319.jpg
    IMG_20230926_170319.jpg
    3.4 MB
She fought me a bit but got the trigger guard all done . Cool ...Welp , other than the front sight shes a done gun " in the rough " stage . Next have to solder on the front blade and tear her all done and taking ng her down to final and sand her down for finish ....
 

Attachments

  • IMG_20230926_183131.jpg
    IMG_20230926_183131.jpg
    3.1 MB
  • IMG_20230926_185302.jpg
    IMG_20230926_185302.jpg
    3 MB
  • IMG_20230926_183139.jpg
    IMG_20230926_183139.jpg
    2.9 MB
  • IMG_20230926_185327.jpg
    IMG_20230926_185327.jpg
    2.9 MB
  • IMG_20230926_185255.jpg
    IMG_20230926_185255.jpg
    3 MB
  • IMG_20230926_185447.jpg
    IMG_20230926_185447.jpg
    3.1 MB
She fought me a bit but got the trigger guard all done . Cool ...Welp , other than the front sight shes a done gun " in the rough " stage . Next have to solder on the front blade and tear her all done and taking ng her down to final and sand her down for finish ....

She’s gettin pretty!!
 
Rob,

Being that 100 year old metal is so hard have you ever made any knives from it? I was wondering if it would make a superior blade compared to modern steel.
 
Make front blade and solder it on the barrel , get er centered ... Got er ... Let er cool then touch er up with file ...
 

Attachments

  • IMG_20230928_135452.jpg
    IMG_20230928_135452.jpg
    3.2 MB
  • IMG_20230928_141116.jpg
    IMG_20230928_141116.jpg
    2.4 MB
  • IMG_20230928_134632.jpg
    IMG_20230928_134632.jpg
    2.6 MB
  • IMG_20230928_135149.jpg
    IMG_20230928_135149.jpg
    3.6 MB
  • IMG_20230928_135928.jpg
    IMG_20230928_135928.jpg
    2.6 MB
  • IMG_20230928_135638.jpg
    IMG_20230928_135638.jpg
    2.6 MB
  • IMG_20230928_141116.jpg
    IMG_20230928_141116.jpg
    2.4 MB
  • IMG_20230928_164115.jpg
    IMG_20230928_164115.jpg
    3.7 MB
One of the first things I do is ....with barrel in and tang screw to torque ... File then sand area around tang to finish ....afterwards take barrel back out and file and sand rest of stock to final ... Stay away from tang area , natch .
 

Attachments

  • IMG_20230928_172130.jpg
    IMG_20230928_172130.jpg
    3.9 MB
  • IMG_20230928_165741.jpg
    IMG_20230928_165741.jpg
    3 MB
And chisel , and file and sand and sand and sand and sand ......
 

Attachments

  • IMG_20230929_132034.jpg
    IMG_20230929_132034.jpg
    3.8 MB
  • IMG_20230929_134949.jpg
    IMG_20230929_134949.jpg
    3.6 MB
  • IMG_20230929_160930.jpg
    IMG_20230929_160930.jpg
    3.4 MB
  • IMG_20230929_134143.jpg
    IMG_20230929_134143.jpg
    2.8 MB
  • IMG_20230929_134949.jpg
    IMG_20230929_134949.jpg
    3.6 MB
  • IMG_20230929_162137.jpg
    IMG_20230929_162137.jpg
    3.7 MB
  • IMG_20230929_154340.jpg
    IMG_20230929_154340.jpg
    3.4 MB
  • IMG_20230929_164204.jpg
    IMG_20230929_164204.jpg
    3.1 MB
Got it all down to final with shape and tools ....just final sanding now then start finish .... So many interruptions lately ! I wanna get this gun done !!
 

Attachments

  • IMG_20231002_123234.jpg
    IMG_20231002_123234.jpg
    3.8 MB
  • IMG_20231002_123722.jpg
    IMG_20231002_123722.jpg
    4.2 MB
  • IMG_20231002_130150.jpg
    IMG_20231002_130150.jpg
    3.6 MB
  • IMG_20231002_123157.jpg
    IMG_20231002_123157.jpg
    3.3 MB
Last edited:

Latest posts

Back
Top