• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Great Plains Vs GPH

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gollywomper

36 Cl.
Joined
Dec 4, 2023
Messages
50
Reaction score
31
Location
Reno nv
I am thinking about a new 50 cal capable of shooting a 380-400 grain bullet for elk hunting. Curious on others thoughts on the GP/GPH rifles in general?
Will a 1-48 barrel suffice for a 385 grain bullet? Or should I look for a 1-32?

The 1-48 would allow me to play with PRB when desired…..
 
@Gollywomper the twist rate of the GPR varied with production dates. At first were 1:48 and later 1:60. However, I don't know what the switch date was. The GPH would be a good choice for the bullets you describe as would a 1:48 GPR. A 1:60 GPR will shoot bullets in the shorter lengths. Example; Hornady PA conical 240 grain.
 
@Gollywomper the twist rate of the GPR varied with production dates. At first were 1:48 and later 1:60. However, I don't know what the switch date was. The GPH would be a good choice for the bullets you describe as would a 1:48 GPR. A 1:60 GPR will shoot bullets in the shorter lengths. Example; Hornady PA conical 240 grain.
I have a CVA mountain rifle that most likely will do ok with the PA conicals. However with elk on my list of critters I think it would be wise to looks for a heavier bullet selection.
 
Back
Top