longcruise
70 Cal.
A frequently asked question, no?
Here is a handy chart.
https://www.firearmsid.com/glossary/s4/s4tb_table7.asp
Here is a handy chart.
https://www.firearmsid.com/glossary/s4/s4tb_table7.asp
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
How much do my balls weigh?
- Thread starter longcruise
- Start date
Help Support Muzzleloading Forum:
Thanks for the chart. Bookmarked. A question I'm asked, too and never before been able to answer. Just too lazy to look it up, like you did for us, I guess. 
longcruise
70 Cal.
Always happy to helpThanks for the chart. Bookmarked. A question I'm asked, too and never before been able to answer. Just too lazy to look it up, like you did for us, I guess.
What interested me was what ball size gets to the weight of 40 grains, the typical 22 rimfire.
That is a nice and handy chart @longcruise. I am sure that many will benefit from it.
Naturally because of my engineering background, I had to do the calculations for my own chart of weights of round ball a long time ago. I did not try to include the added weight of a sprue. I used the density of lead from an old chemistry and physics handbook. For all engineering and muzzleloading needs, my calculations agree with the values in the chart. Having my own calculations built into a spreadsheet means that I can calculate the weight of any diameter ball. So, while I calculate that a 0.526 ball will weigh 218.855 and the above chart lists a 0.525 ball that weighs 217.248 grains, the practical difference for our load developments is not worth discussing differences as sprues can easily fall into the allowable tolerances.
Naturally because of my engineering background, I had to do the calculations for my own chart of weights of round ball a long time ago. I did not try to include the added weight of a sprue. I used the density of lead from an old chemistry and physics handbook. For all engineering and muzzleloading needs, my calculations agree with the values in the chart. Having my own calculations built into a spreadsheet means that I can calculate the weight of any diameter ball. So, while I calculate that a 0.526 ball will weigh 218.855 and the above chart lists a 0.525 ball that weighs 217.248 grains, the practical difference for our load developments is not worth discussing differences as sprues can easily fall into the allowable tolerances.
longcruise
70 Cal.
I did likewise. I'll try to attach the spreadsheet but not sure how to do it.
