Looking for opinions about shot sizes.

[S.Kenton]

When I squirrel hunt with my 62/20 gauge Fowler, I like to use either #5 or #6. What’s the other sizes that would be good for squirrel, that you guys have used? I’ve not tried #7 yet, I have some and may try it on my next outing..

 

[waksupi]

Squirrels have a tough skin. 6 shot should be good.

 

[Britsmoothy]

Pattern wins every time but I draw a line through anything under#7n'arfs and no bigger than #5.

 

[user 43911]

Pattern and distance are the factors, loads need to be shot from your gun not what somebody states their gun will do. Every gun is different, shot size, wad type over shot card or wadding, powder, to fast and a lot of guns donut the pattern, the list goes on. My answer is .600 or .590 and head shots with light powder drop

 

[Comfortably_Numb]

I use #4's for all my hunting. I find it patterns tighter and has more knock down power.

 

[azmntman]

My Pop was a #4 for everytig kinda guy. I like it. I have used 5 and 6 on turkeys just for more density in the kill zone. TEST n report back.

 

[NorthFork]

Pattern wins every time but I draw a line through anything under#7n'arfs and no bigger than #5.

Could not say it better.

 

[Mtman725]

I use #5 Magnum hard shot for almost everything and 7.5's, for the rest.

 

[Brokennock]

I mostly use #5 shot for squirrels, pheasant, and turkey. It is a compromise, but a good one.
I really like the killing power and lack of shot in the game of #4 shot, but it can be tough to get a good pattern from.
#6 is easier to get a full pattern from but it takes more shot in the game to put the animal down, and it is more shot of a smaller size so harder to pick out.
I only drop to 7 1/2 shot for quail, partridge, and the one time I got to go dove hunting. But, all those were with antique unmentionable guns.

So, for my uses #5 is either a really good compromise between #6 and #4,,, or it is just the perfect size,,,, depends on perspective.

 

[R Ellis]

#4 if it patterns good is the best killer

 

[oldwood]

Copper plated #6's and #5's go through tough critters hides.

 

[TransYank]

I'm not an expert But I do kill a lot of Squirrels. I have an original English 12ga double SxS (No chokes). I load it as per VM Star book suggest with 1oz or 1 1/8 of # 5 lead and 30-35 yards patterns great for squirrel. This year I even managed to kill a dove with it when Squirrel hunting. I also have a Modern CVA 12ga SxS that has a little tighter bore still no chokes and I go up to 1 1/4oz. Always square loads.

 

[jackpine54]

For squirrels I've always used #5 shot. It also works good for rabbits, turkey and pheasant. I use 6 or 7 shot for grouse and woodcock.

 

[smo]

1 1/2 ozs of #6 shot, works for me.
16 gauge cylinder bore ..using the Skychief loading process..

 

[S.Kenton]

View attachment 189173
1 1/2 ozs of #6 shot, works for me.
16 gauge cylinder bore ..using the Skychief loading process..

Thats getting it done! I’m going to pattern my Fowler this weekend, weather permitting of course and I’ll report back.

 

[Dale Lilly]

Geese - #4; Ducks, Pheasants, Squirrel - #6; Grouse, Quail - 7; Rattlesnakes #7 or #8 [dense pattern]

 

[Limberjoe]

I like #5 shot. Carries a little more energy. Even with fives, I'm always surprised at how many pellets only penetrate just the skin!

 

[rick1964]

I’m in the 4’s crowd for sure On squirrels. 5’s also seem good. 6 just didn’t get the penetration but good patterns. I’ve used a number 6, 7 1/2 duplex mixed load on head shooting turkey in fall. Great pattern. Penetrates the neck skin and bone

 

[appalichian hunter]

#5 FOR SQUIRRELS AND RABBITS #7-1/2 FOR BIRDS #4 FOR TURKEYS.

 

[ohio ramrod]

I use #6 for rabbits,pigons,pheasants, and #4 for duck, goose and coyote. My father never used #5 since he believed it did not pattern as well as #4 or#6 so I never tried #5's