Looking at buying a GPR in 50cal. Per.
Anyone have any dealings with this company.
Price is good, just curious of there CS.
Hinterland
Anyone have any dealings with this company.
Price is good, just curious of there CS.
Hinterland
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Lyman GPR ?
- Thread starter Hylander
- Start date
Help Support Muzzleloading Forum:
Yes, Lyman customer service is excellent.
They don't make the GPR. The rifles are made in Italy by the company Investarms. Quality is solid. Styling is quite authentic. Accuracy after smoothing the bore through shooting can be excellent. You might like the .54 version as it is less barrel heavy.
I've had two GPRs and both were most excellent. Still have one. Beut.
They don't make the GPR. The rifles are made in Italy by the company Investarms. Quality is solid. Styling is quite authentic. Accuracy after smoothing the bore through shooting can be excellent. You might like the .54 version as it is less barrel heavy.
I've had two GPRs and both were most excellent. Still have one. Beut.
sghart3578
Pilgrim
- Joined
- Oct 24, 2014
- Messages
- 26
- Reaction score
- 7
Another vote for the Lyman GPR. I have one in .54 cal and it is awesome.
I know that is not what you are asking though.
I have not had any dealings with their customer service.
I know that is not what you are asking though.
I have not had any dealings with their customer service.
rdstrain49
40 Cal.
- Joined
- Dec 25, 2010
- Messages
- 460
- Reaction score
- 3
In my experience, all of Lyman's products and related customer service are first rate.
- Joined
- Jan 3, 2004
- Messages
- 14,767
- Reaction score
- 319
Outstanding guns. Dunno where you are, but I'd give serious thought to a 54 rather than a 50. I own one of each, and extra ball mass aside, a little less steel in the barrel sure changes (and improves) the way the 54 balances in my book.
nwtradegun
50 Cal.
- Joined
- Jan 19, 2011
- Messages
- 1,496
- Reaction score
- 17
I would go with a 54 if you plan on hunting.
- Joined
- Mar 23, 2015
- Messages
- 5,010
- Reaction score
- 3,585
Most responders commented on Great Plains Rifles, if you were asking about Hinterland, I can't help you. I have no experience with them and haven't heard of them before, but that doesn't mean they aren't reputable.
As the others have said, the Lyman Great Plains Rifle is one of the better plains style rifles around.
I notice in the Hinterland link you posted, the picture of the rifle has target style sights on it.
Normally, the rifle does not have a hooded front sight or a peep sight. It has a simple blade front sight and either a non-adjustable or adjustable open leaf rear sight.
It usually has both of these rear sights with it with the adjustable sight installed.
The adjustable rear sight is a little "clunky" and most people replace it with the simple, non-adjustable leaf sight.
If you buy this rifle, remember, the bore will come protected with a very difficult to remove grease in it. Until all of the grease is removed, accuracy will be poor.
A good automotive disk brake cleaner or throttle body cleaner along with a few dozen cleaning patches will work wonders to remove the grease.
Also, the front sight blade is intentionally left tall.
That will cause all of your shots to hit very low on a target.
After trying several different patch thicknesses, ball sizes and powder charges to find the one that makes the smallest group on the target, file the top of the front blade down to raise the point of impact.
I know you will really enjoy the GPR so, my advice is, order it.
I notice in the Hinterland link you posted, the picture of the rifle has target style sights on it.
Normally, the rifle does not have a hooded front sight or a peep sight. It has a simple blade front sight and either a non-adjustable or adjustable open leaf rear sight.
It usually has both of these rear sights with it with the adjustable sight installed.
The adjustable rear sight is a little "clunky" and most people replace it with the simple, non-adjustable leaf sight.
If you buy this rifle, remember, the bore will come protected with a very difficult to remove grease in it. Until all of the grease is removed, accuracy will be poor.
A good automotive disk brake cleaner or throttle body cleaner along with a few dozen cleaning patches will work wonders to remove the grease.
Also, the front sight blade is intentionally left tall.
That will cause all of your shots to hit very low on a target.
After trying several different patch thicknesses, ball sizes and powder charges to find the one that makes the smallest group on the target, file the top of the front blade down to raise the point of impact.
I know you will really enjoy the GPR so, my advice is, order it.
Yes, I used lots of non-chlorinated brake parts cleaner and tons of patches. That preservatant is a chore to get out!
I'm pretty happy with mine and it's .50 caliber. Which is fine to my way of thinking. Is a .54 "better?" Maybe, if you're hunting moose. I'll go no higher than .50, though.
lyman cs is top end. I have a gpr in .50 it has served me well for all the years I have own it. the .50 has dropped every thing I have shot with it. I can see no need for a .54. I have shot ground hog deer and a bison with it. also won many off hand matches.
Hi,
The Lyman Great Plains rifle is a real hunter's rifle.
In .54 you up the ante in your favor for heavy game, you also make it a little easier to carry.
You can spend a lot more on a custom gun, for no real gain.
You can buy cheaper, but you will always regret not getting the Lyman, if you pass on it.
Like some of the fellows suggest make sure you rid the barrel of Lyman's tar that they bake into the barrel.
Then you will see the potential of a Lyman.
Good luck on your quest.
Fred
The Lyman Great Plains rifle is a real hunter's rifle.
In .54 you up the ante in your favor for heavy game, you also make it a little easier to carry.
You can spend a lot more on a custom gun, for no real gain.
You can buy cheaper, but you will always regret not getting the Lyman, if you pass on it.
Like some of the fellows suggest make sure you rid the barrel of Lyman's tar that they bake into the barrel.
Then you will see the potential of a Lyman.
Good luck on your quest.
Fred
I replaced the adjustable sight that came on mine with a solid replacement from TOW. Looks better and shoots fine at my range.
This talk about the .54 caliber being lighter than the .50 boils down to this.
The .54 caliber gun is about 1/3 pound (5 ounces) lighter.
That isn't much of a difference when you realize the GPR is a fairly heavy gun weighing in at about 9 1/4 pounds for the .50.
The .54 caliber gun is about 1/3 pound (5 ounces) lighter.
That isn't much of a difference when you realize the GPR is a fairly heavy gun weighing in at about 9 1/4 pounds for the .50.
- Joined
- Jan 3, 2004
- Messages
- 14,767
- Reaction score
- 319
Zonie said:
The distinction is that the extra 5 ounces is out in the barrel. Not a big deal at all in carry weight, but for me it has a very good affect on the balance of the rifle while shouldered. There's still plenty of weight in the 54 for good "hang" while sighting offhand, but the center of gravity is shifted back just enough to make a difference to me. Your mileage will most certainly vary.
James Stella
40 Cal.
- Joined
- Sep 4, 2012
- Messages
- 368
- Reaction score
- 51
I actually bought my Lyman From Hinterland about 5 years ago. I had no issues with them. At the time hey had a Left Hand they were trying to get rid of and I got a great deal on it. The $564 they are showing for a price is about going rate. There is one on Gunbroker right now that is used but unfired for a good price.
The item number is 717254194. If you put it in the search it should come up.
The item number is 717254194. If you put it in the search it should come up.
Zonie said:
At my age every inch & ounce counts!
Fred
