- Joined
- Mar 26, 2005
- Messages
- 729
- Reaction score
- 784
Tried it this time with my northwest trade gun smoothbore.
.600 round ball
80 grains of 3F
Pillow tick patch, bore butter lube.
My first 3 shots would have been a very good group-for me-but didn't score.
Here is the target after 10. It was a sunny mid 40's day here in Indiana. After firing 5 shots I looked at my gun and realized my flint was missing. I looked all over the firing line but never found it. I then looked in my gun box for the bag of flints I keep in there. I had taken them out last night to put one on my trade gun, then forgot to put them back into the box. So home I went, picked up the flints and continued on.
Mike B of Duelist 1954 believes that smoothbores can be made to be accurate with higher powder charges. I have seen him use 110 grains of powder. My shoulder would not tolerate that, so I kept it down to 80 grains. I normally load at 60. It did seem to help with point of impact.
.600 round ball
80 grains of 3F
Pillow tick patch, bore butter lube.
My first 3 shots would have been a very good group-for me-but didn't score.
Here is the target after 10. It was a sunny mid 40's day here in Indiana. After firing 5 shots I looked at my gun and realized my flint was missing. I looked all over the firing line but never found it. I then looked in my gun box for the bag of flints I keep in there. I had taken them out last night to put one on my trade gun, then forgot to put them back into the box. So home I went, picked up the flints and continued on.
Mike B of Duelist 1954 believes that smoothbores can be made to be accurate with higher powder charges. I have seen him use 110 grains of powder. My shoulder would not tolerate that, so I kept it down to 80 grains. I normally load at 60. It did seem to help with point of impact.