Seeking Opinions on a Recent Kibler SMR Purchase Experience

[Second-rate Marksman]

You did well getting out of “A Bad Situation “ I betcha if you ordered a kit you could do a much better job than that!!!

Thanks, Reds. A Kibler kit is definitely in my future. I’ve had a little experience browning and torch-bluing hardware as well as refinishing stocks and have been reasonably happy with the results. It’s difficult as a husband and father of four young kids to find the time to commit to a project like that though… just the season of life that I’m in right now!

 

[Second-rate Marksman]

Yes I think you should of been informed of the break and the crack. But I give credit to the seller for making it right by refunding your money.

I’m certainly grateful for the refund— just not the manner or circumstances in which it was given. You’d have to be a real scumbag to refuse a refund after neglecting to disclose issues with the item you’re selling, right?

I didn’t want to name this individual for fear of the fallout that might follow. It should be noted, however, that he isn’t a “nobody” putting together Kibler kits on his kitchen table. He’s a rather well-known name in the community and is generally well-respected. He was by me, too, up until recent events. You would all probably be shocked if I name-dropped.

 

[DrLaw]

I know this is a little off topic, but I question why you did not just build an SMR yourself?

I say this because I am not a woodworker, not a metal worker, generally a klutz with tools and only seem to be skilled with words. However, I built one which is being used by Mr. Kibler on his website as an example of what can be built. Photo in the SMR description on pegs in a window.

So, if I could do it, I pretty much think ANYBODY could do it by logical inference.

The Doc is out now.

 

[Nav]

Barrel finish is certainly preference. That "antiqued" (rusted) looks like bloody hell to me. If I want a historic firearm that's corroded I'll buy one, but I don't want a new one to look like that before I've had the chance to put my own honest wear on it!

On the .32 SMR, which was my second build, I went with a "new" rifle. I polished all the steel excessively with Mother's and a high-speed polishing ball. I cleaned it up on a bench wheel till it was near a mirror finish before rusting the hell out of it over a steaming bathtub. I could tell right away that the rust was far more even and thick than on my first build. After dunking in the boiling water the blue/black that it came out was better than I could have hoped for. It also has an exceptionally highly figured maple stock, and instead of a traditional oil finish I wanted to keep it very light so the figure popped, and after hitting with the feric I gave it multiple coats of high gloss spar varnish. Not trad at all, but I am super happy with the way it came out. I will try to remember to take some good photos and post them.

 

[Second-rate Marksman]

I know this is a little off topic, but I question why you did not just build an SMR yourself?

It’s not that I’m not capable— it’s just not feasible for me right now at this stage of my life. I’m a husband with a list of “honey-do’s” a mile long, father to four kids ranging from ages seven to 12 months, and both myself and my kids are involved in extracurricular activities that take up a great deal of our time.

Heck, I’d also rather be out there shooting with what little free time I’ve got!

 

[DrLaw]

Understood Second Rate. Though I would also argue with you that being a hubby and father to four kids makes you a First-Rate if you are doing it right, which it sounds like you are.

The doc is out now.

 

[wiscoaster]

I think the seller went well out of their way to make it right by you and should be commended for doing so. Though perhaps the manner in which it was done might leave something to be desired in your opinion, I'd very much doubt you would have had the same outcome of being rather instantly made whole if it was the case of a similar situation on a Gunbroker-auctioned item.

 

[Second-rate Marksman]

I think the seller went well out of their way to make it right by you and should be commended for doing so. Though perhaps the manner in which it was done might leave something to be desired in your opinion, I'd very much doubt you would have had the same outcome of being rather instantly made whole if it was the case of a similar situation on a Gunbroker-auctioned item.

I’m sorry, but I tend to disagree with you here. I think the click of a “refund” button hardly constitutes “going well out of their way”, but I digress.

A refund in an instance like this is a reasonable expectation, I should think— not a gracious and benevolent act on behalf of the seller. Though money exchanged hands, the gun did not.

Even after I pointed out the knot/inclusion (and even a possible crack) forward of the lock, the seller insisted it didn’t exist.

Listen… I’m not trying to absolve myself here. I clearly should have exercised more care and not been so hasty with my purchase. Caveat emptor, right? In my defense, I had dealt with this gentleman before and purchased two other kit builds from him; I’d come to expect a certain level of quality from his work.

 

[reddogge]

The knot wouldn't bother me much, but that break should have been photographed and mentioned along with the knot.

 

[Flint62Smoothie]

A refund in an instance like this is a reasonable expectation, I should think — not a gracious and benevolent act on behalf of the seller. Though money exchanged hands, the gun did not.

100% agree!

Sounds like the builder had a HISSY FIT when you 'challenged' them ... and I sure hope they READ this, LOL!

 

[wiscoaster]

.....

Sounds like the builder had a HISSY FIT ....

A person can have a "hissy fit" and still end up doing the right thing. In the end, it's doing the right thing that counts.

 

[Icemanxxxv]

In the end he made it right and you didn't have to chase him down. For that aspect alone he remains reputable and unknown to me.

 

[AZshot]

When a seller realizes they've been caught trying to hide a major quality error by a savvy buyer, who will likely return the gun after expensive shipping to him, and risking further damage going back and forth, the obvious thing to do is to cut your losses. That's what it sounds like the seller did, without an apology or any discussion about options to make it right (another rifle, or a discount on this one). He "made it right"... for HIM! Not for the potential buyer he was trying to screw. Just ready to move on to another buyer, without a "beg your pardon..."

No comms saying "oh, I'm sorry, you're right, how about if I refund your money?" Instead he throws the money back over the bar and walks out. I wouldn't buy from this kind of person again.

 

[Second-rate Marksman]

Thanks

No comms saying "oh, I'm sorry, you're right, how about if I refund your money?" Instead he throws the money back over the bar and walks out. I wouldn't buy from this kind of person again.

Thanks, AZ. Yours is an accurate characterization of what happened. Any attempts at further communication from me were ignored.

 

[AlexB]

Thanks


Thanks, AZ. Yours is an accurate characterization of what happened. Any attempts at further communication from me were ignored.

Who was it?
I ask because I am in the market and don't want to deal with them.

 

[Wirehair]

Anybody that builds a rifle knows every wart and pimple on that rifle (at least I do). In my case, every rifle I've built has some defect in either the parts or assembly which has to be corrected. The challenge is hiding or minimizing the flaw so it doesn't distract from the finished product. If I were to sell a rifle, I'd feel obligated to disclose every error or correction, whether visible or not. That may or may not affect the price or sale, but it would be unthinkable to do otherwise. It sounds like the builder knew his work was second rate but wanted a first rate price. That's unethical.

 

[sturmkatze]

No doubt they’re going to be consummating up there.

Do you really think they could get away with that?

 

[Smokey Plainsman]

Do you really think they could get away with that?

Probably. Might have to get creative and it could turn into a sticky situation if you know what I mean.

 

[Second-rate Marksman]

Probably. Might have to get creative and it could turn into a sticky situation if you know what I mean.

Understood Second Rate. Though I would also argue with you that being a hubby and father to four kids makes you a First-Rate if you are doing it right, which it sounds like you are.

The doc is out now.

Thank you! That’s very kind of you.

I’ve recently gotten involved with Trail Life (a Boy Scouts alternative, to those who aren’t familiar with the movement), and have agreed to take on a leadership role, which takes up a great deal of my free time. Doing my darnedest to raise up men who are part of the solution and not the problem.

 

[Smokey Plainsman]

Thank you! That’s very kind of you.

I’ve recently gotten involved with Trail Life (a Boy Scouts alternative, to those who aren’t familiar with the movement), and have agreed to take on a leadership role, which takes up a great deal of my free time. Doing my darnedest to raise up men who are part of the solution and not the problem.

I am glad you are raising your little ones in the faith.

What this world needs is more Jesus Christ. The news is full of violence right now towards God’s chosen people. I pray for swift defeat of the blasphemers who want to bring there cave man worldview to our shores.