CuNosecap
45 Cal.
Actually, I think that quote is attributed to Frank Lloyd Wright, as it was and still is his school's mantra.As Warhol (I thinksaid) "form follows function)
SM SMR Built & Shot
- Thread starter wiscoaster
- Start date
Help Support Muzzleloading Forum:
longcruise
70 Cal.
I had my doubts about the Warhol source but somehow I thought it was so. I did some googling and came up with this which may or may not be the end of the trail.
"The phrase "form follows function" was coined by architect Louis H. Sullivan in his 1896 essay "The Tall Office Building Artistically Considered." The statement refers to the idea that a skyscraper's exterior design should reflect the different interior functions."
By posting I assume you want opinions. Maybe I could live with the tang repair, a lot of things were done to original guns to repair and keep them going. I could not keep the muzzle looking like that though, historically correct is more important to me I guess. In the end, it is yours and if it's ok with you then that is all that matters.
well, you accomplished that goal, it stands out alright,,,,,,,,,,,,,,,,,
Kmcmichael
45 Cal.
- Joined
- Feb 11, 2021
- Messages
- 609
- Reaction score
- 1,017
I was ready to compliment the tang inlay until you made the girlfriend comment regarding your phallic muzzle modification.
one generally cones the inside of the muzzle.
one generally cones the inside of the muzzle.
- Joined
- Apr 5, 2019
- Messages
- 837
- Reaction score
- 920
Appears you were hitting target #33 while shooting from station #32. I think your shots will strike the correct target if you'll re-crown that muzzle...
Never seen that kind of a drawn back muzzle on a muzzleloader before but have seen that profile on others kinds. Overall looks like a nice build. I don't mind the tang repair standing out, doesn't bother me either way. Thanks for posting and enjoy.
Good job. As long as you can get it to impact where you want, I'd say it's a success. I'd shoot it.
Go on and let them give their opinions. I always picture them furiously sanding their lil ramrods as they race to comment about how someone's rig LOOKS. It's just nuts.
As for myself, I'd leave the *womens* out of these conversations. It rather disrupts the flow of things.
Go on and let them give their opinions. I always picture them furiously sanding their lil ramrods as they race to comment about how someone's rig LOOKS. It's just nuts.
As for myself, I'd leave the *womens* out of these conversations. It rather disrupts the flow of things.
Last edited:
Not really. Other motives.
Jim in Wisconsin
40 Cal
- Joined
- Jun 9, 2021
- Messages
- 313
- Reaction score
- 410
Wiscoaster had a lot of trouble building that rifle, but he ended up with a shootable gun that looks decent and learned stuff along the way. Nothing wrong with that!
Nice looking rifle on a nice piece of Proper Wood..with No artificial stain applied grain. If all you Critics can do any better lets see them.
It's his build so he can do as he prefers. The inletting is better than most we see here AND the Group shows promice..Nice Job WIS..O.D.
It's his build so he can do as he prefers. The inletting is better than most we see here AND the Group shows promice..Nice Job WIS..O.D.
Now you've seen two of them. These are not the only two out there, either, despite uneducated jeers.
Mine is coned on both sides. The outside profile makes it a helluva lot easier to pour powder down the hole without spilling any during the initial tip of the measure.
Thanks! Now I have seen 2 of them. Neat idea, I don't have a problem with it, just haven't seen before. Bet it does help with initial powder dump. Bet it takes a lot of filing to take that much metal away.
Doesn’t matter to me what someone does with their build. Their gun.
Now a serious question is whether the filing of the muzzle will make it heat up and possibly deform or not. Especially if the inside of barrel is coned.
Now a serious question is whether the filing of the muzzle will make it heat up and possibly deform or not. Especially if the inside of barrel is coned.
tgfrench
40 Cal
It's got to make centering a patch more difficult, can't imagine trying to cut a patch at the muzzle.
Classy.
Well it's all together and it shoots and your happy...It's all that matters.
The muzzle is different, but the way you lined up the octagon to go with it. You did well. Why you just didn't get another breech plug from Kibler. Would have been easier. But to each h their own...
The muzzle is different, but the way you lined up the octagon to go with it. You did well. Why you just didn't get another breech plug from Kibler. Would have been easier. But to each h their own...
That's a beautiful bevel. MUCH nicer than mine. And VERY sexxy!!
Last edited:
That barrel doesn't get hot enough to deform. In fact, it doesn't get hot at all. Try mag-dumping a wood-stocked AK. Now THAT barrel gets hot enough to risk setting your forearm on fire, and it still doesn't hurt the barrel.
