What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Took my Euroarms Mississippi to the range after filing the front sight down. This was the first shot.
 

Attachments

  • 20230116_144155.jpg
    20230116_144155.jpg
    649.8 KB
A friend gave me a bottle of a M/L cleaning product called "Butch's black powder Bore Shine"; I never tried it until a few days ago. I followed the instructions, three soaked patches, 6 strokes each, 3 dry patches and a spray with WD-40 and another patch to sop up the WD-40.

I brought my rifle into the house to let it sit for a few days then checked the bore with my Teslong bore scope, I was expecting to see some surface rust. This cleaning method seemed too quick and easy. What I found was the cleanest bore I have ever seen on one of my rifles, no graphite, no left-over fowling on the breech plug, even the touchhole liner looked like it had been scrubbed inside.

butch's.JPG
 
Last edited:
Townsville is located in the dry tropics of North Queensland and is usually referred to as 'Brownsville'. This year, we are having a particularly good wet season, making the conditions verdant, wet and lush. A big thanks has to go out to Scotty👍, one of our Range Officers, who volunteered today to head out into sticky wet conditions to open the range for a few keen shooters. I added some dimension to the low cloud by blowing some smoke from my .54 Pedersoli Tryon. Given the extreme humidity and dampness, I was pleased not to experience a single misfire. That moisture really gathered up around the nipple and hammer. Now, to cleaning.

Kind regards, Pete

PS Not complaining mind, a great morning out - I see what some of you Northern Hemisphere lads and ladies have been experiencing in the cold and snow. Brrrrrrrrr ......... Respect.

View attachment 190500View attachment 190501View attachment 190502
Looks like a great place to shoot.
 
A friend gave me a bottle of a M/L cleaning product called "Butch's black powder Bore Shine"; I never tried it until a few days ago. I followed the instructions, three soaked patches, 6 strokes each, 3 dry patches and a spray with WD-40 and another patch to sop up the WD-40.

I brought my rifle into the house to let it sit for a few days then checked the bore with my Teslong bore scope, I was expecting to see some surface rust. This cleaning method seemed too quick and easy. What I found was the cleanest bore I have ever seen on one of my rifles, no graphite, no left-over fowling on the breech plug, even the touchhole liner looked like it had been scrubbed inside.

View attachment 190974
Bore pictures?
 
A friend gave me a bottle of a M/L cleaning product called "Butch's black powder Bore Shine"; I never tried it until a few days ago. I followed the instructions, three soaked patches, 6 strokes each, 3 dry patches and a spray with WD-40 and another patch to sop up the WD-40.

I brought my rifle into the house to let it sit for a few days then checked the bore with my Teslong bore scope, I was expecting to see some surface rust. This cleaning method seemed too quick and easy. What I found was the cleanest bore I have ever seen on one of my rifles, no graphite, no left-over fowling on the breech plug, even the touchhole liner looked like it had been scrubbed inside.

View attachment 190974
I'd give it a shot
 
Not today but on Sunday last I shot my Hawken style rifle at Butte. Was an offhand gong match at varying ranges. Lots of fun. It was a reminder that I need to adjust the hammer strike and make a new nipple wrench and make a .58 jag for it. I cried and begged so they let me use a peep sighted rifle since I'm so blind. Was no advantage for me.
new hawken  (5).JPG
new hawken 1984 - 2020 (8).JPG
 
ran my biathlon course again today. too busy and tried to cram it in.. Ran well but shot poorly... only two hits out of 9 plates... Time to reset...
 
Shot the .32 with a new patch and lube combo. Loaded much easier than what I had before. 30 gr goex ffg (weighed) Walmart plow ticking 7:1 ballistol dry lubed with .311 Lee ball. In about .5 inch at 25. Group looks a little bigger on target but it was slowly falling over as I shot it so the last two are kind of oblong holes. First clean bore shot hit way left. 1" dot 4 in the dot 6th shot went I to a 4" 50 yard gong just cause I like the sound and unlike the .58 the little gun doesn't rip the stand out of the ground on every shot at that range. Guess since it's 4:25 that was sort of yesterday Lol got to be ready for those 12 hour night shifts this week.
 

Attachments

  • 20230117_121624.jpg
    20230117_121624.jpg
    1.5 MB
Back
Top