Got the Jukar .45 flintlock out and fired off a few shots. Have been very satisfied with the progress I have made. Started off only getting a few shots off before having ignition problems but after some lock work and a better understanding of a reliable, consistent loading process, I was able to get 20 shots off with only 2 flashes in the pan. Also hit my 8" steel plate at 50 yards, 9 out of 10 shots. I have come a long way in the flintlock field and can wait till I am able to save up for a better quality rifle one day.
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
Beautiful day here in Southern Vermont, temperature 70f with 15 mph winds. I figured it would be a good day to pour some lead balls, I can leave the windows and doors open in my workshop, and no need for a fan. Cast some .530 lead balls for my Woodsrunner, and .600 for my 20 gauge trade gun. Now I should have plenty for a few trips to the range.
Attachments
Black_Feather
69 Cal.
Finished a semi translucent horn kit from Powderhorns and more. Originally was going to sell but decided to keep because it was so darn pretty. Polished it up to 3000 grit and hit it with 0000 steel wool. Only complaint was it’s so darn shiney now that the horn shows teeny tiny micro abrasions from the fine steel wool. Only normal I suppose, plus banging it around in the woods will give it a nice used broke in patina to it…Finished it off by adorning a lewis and Clark trade bead on the spout plug.
Polishing brass and staining ramrod.
- Joined
- Nov 14, 2010
- Messages
- 1,207
- Reaction score
- 1,609
Went to the range today beings it finally stopped raining any way im thinking my gun is a 20 yard shooter.14 holes 3 went threw the other side of the soup can.
Attachments
Gtrubicon
50 Cal.
- Joined
- Jun 19, 2021
- Messages
- 1,402
- Reaction score
- 2,432
I don’t like soup myself!
TTT
36 Cl.
- Joined
- Dec 1, 2018
- Messages
- 93
- Reaction score
- 322
A friend of mine fitted and really the only thing I did was add one of my Bear claws.
Psycho Mike
Free Cdn
Glad I didn't make the trip then....that's a long haul from me if things were pretty bare for ML stuff.
aussie pete
40 Cal
A wonderful morning at the local muzzle loader comp today - a good bunch of lads! I took out the first target scoring 96.1, the closest shooter four points behind me 
. We go by international rules, firing thirteen shots and counting the best ten. Unfortunately, things went downhill from there, as the hammer on my Tryon wouldn't hold in the full cock position - I chose to withdraw from the next two stages to navigate the issue 
. Turns out, the little screw on the trigger plate, the one that keeps the tension on the lock spring had backed out a few turns over the years, not revealing its issue until this morning. A bit of a diagnostic sorted it out; I'll be ready for next month! Oh, and I know how to fix the issue if it ever happens again - perhaps I'll put a bit of the wife's fingernail polish on the offending screw to prevent it from moving ...
As you can see, our Shoot Captain likes to recycle the targets
.
Cheers, Pete
. We go by international rules, firing thirteen shots and counting the best ten. Unfortunately, things went downhill from there, as the hammer on my Tryon wouldn't hold in the full cock position - I chose to withdraw from the next two stages to navigate the issue . Turns out, the little screw on the trigger plate, the one that keeps the tension on the lock spring had backed out a few turns over the years, not revealing its issue until this morning. A bit of a diagnostic sorted it out; I'll be ready for next month! Oh, and I know how to fix the issue if it ever happens again - perhaps I'll put a bit of the wife's fingernail polish on the offending screw to prevent it from moving ...As you can see, our Shoot Captain likes to recycle the targets
.Cheers, Pete
Last edited:
Pulled out my 40 and 45 cal cap locks to be sure the recent cleaning left no residual moisture in the barrels. Since it’s been in the 90’s here, I put them in the car, windows up, post cleaning, pre oiling the bore to dry. Both checked out good.
- Joined
- Oct 6, 2020
- Messages
- 1,651
- Reaction score
- 2,709
So I have a powder horn that came with a little poor boy flintlock I bought about a year ago. It’s been sitting because I just don’t care for the way it was finished. I am thinking of redoing it but noticed a makers mark on it. Thought I would check if anyone knew of the maker before I re shaped it…if it had value because of the maker I wouldn’t want to re shape it.
Attachments
- Joined
- Nov 12, 2018
- Messages
- 279
- Reaction score
- 957
Dave Dworshak
40 Cal
Little range day fun at the farm. .45 derringer fired for the first time since I bought it this spring. Shot a few rounds from my brothers 1861 Springfield!
- Joined
- Oct 6, 2020
- Messages
- 1,651
- Reaction score
- 2,709
- Joined
- Jan 27, 2004
- Messages
- 1,715
- Reaction score
- 526
Just rough sanded.
Just an old hunk of wood my brother had been saving.[walnut]
Wiped some water on it with a damp cloth.
Very nice!
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,009
- Location
- On the Border in Idaho looking at BC
finished shaping the tang, drilled and counter sunk and made a screw for the tang on the golden age Kentucky i am building from a walnut plank.
filed two dovetails into the Colrain barrel for pin tabs. got the lugs installed.
started the Ramrod channel. need to find my 3/8 drill. cleaned the shop a little now can't find stuff.
got the package of Isaac Haines parts that i ordered from TOTW on the 9th of may. said order disappeared from this dimension via UPS until today. Totw had already sent a replacement order via FedEx that i got in like 3 days. called them and paid for this set of stuff. can always use it. Guess another Isaac Haines is on the menu. Have a walnut blank that might work.
filed two dovetails into the Colrain barrel for pin tabs. got the lugs installed.
started the Ramrod channel. need to find my 3/8 drill. cleaned the shop a little now can't find stuff.
got the package of Isaac Haines parts that i ordered from TOTW on the 9th of may. said order disappeared from this dimension via UPS until today. Totw had already sent a replacement order via FedEx that i got in like 3 days. called them and paid for this set of stuff. can always use it. Guess another Isaac Haines is on the menu. Have a walnut blank that might work.
RedOneFive
40 Cal
Norman Brooks
45 Cal.
Picked up another project. Looks like an older precarved with a Sharon barrel 7/8"X42"-.45cal. Got it for Cheep. Whoever started it did not have the knowledge to finish it. Butt plate will have to be moved forward, trigger pull is 15" where it is mounted now. Touch hole liner is a bolt inserted cut off and drilled so will have to replace that. Will see if I can un-breech and make sure that was done correctly. Lock I got from a friend and it fits well into the opening.
