Which kit?

[Tannehill]

Thanks

 

[Tannehill]

Beautiful rifle.

 

[APG]

Get what makes you happy. And not everyone wants a Kibler.

 

[Tannehill]

A kibler would be nice, but out of my price range .

 

[JHB]

You will like that kit. My next one will be a Woods Runner.
I talked to a gentleman at Pecatonica to day. They can supply a blank for an investarms hawken I just finished. The stock that came in the kit was the wrong wood, lock was 1/8" too far forward and a few other problems. Not even going to try to get the stock replaced from them.

 

[Tannehill]

Was the barrel already pinned and if so how did you remove them and replace them?

 

[frankie]

I agree with APG. My pick would be Pedersoli. I have several and the quality is great.

 

[frankie]

Get what makes you happy. And not everyone wants a Kibler.

I agree with APG.

 

[TDM]

Was the barrel already pinned and if so how did you remove them and replace them?

Buy a decent 1/16” long nose drift punch and carefully tap the pins out with a small hammer. Tap them out far enough that you can grab the end with pliers and pull them out. File or sand off any teeth marks before reinstalling. I always put my pins in from the right and take them out from the left.

 

[TDM]

I agree with APG. My pick would be Pedersoli. I have several and the quality is great.

Agree, a Pedersoli kit is a good place to start.