Banjoman
Hillbilly
The wood is light weight and soft. Really soft. Doesn’t take much to put a blemish on it. The steel seems okay though. Probably why these were thrown in on a trade.
. I can always change the wood later if needed.
What Muzzleloading Stuff Did You Do Today?
- Thread starter PathfinderNC
- Start date
Help Support Muzzleloading Forum:
The wood is light weight and soft. Really soft. Doesn’t take much to put a blemish on it. The steel seems okay though. Probably why these were thrown in on a trade.
. I can always change the wood later if needed.
- Joined
- Apr 9, 2012
- Messages
- 1,934
- Reaction score
- 3,733
Thanks for display; I've never seen a stake anvil. Dale
Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!
Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.
Everyone Welcome!
Would have loved to have come, but I just spent this past week camped ahead of our Tennessee Longhunters shoot. I’m still ragged out…. It was mighty chilly last week!View attachment 357576
View attachment 357575
Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!
Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.
Everyone Welcome!
Attachments
Hatchet-Jack
54 Cal.
Finished inletting the thumb piece.
- Joined
- Aug 7, 2009
- Messages
- 424
- Reaction score
- 656
"Surprise, surprise!" as Gomer would say. The barrel slid into place today. No extra wood shaving needed for the Kibler Fowler. Pin holes lined right up, too. I had been having problems with it fitting. However, the barrel was cold today and maybe that was it.
The Doc is literally out now heading to Wally World for some med refills.
The Doc is literally out now heading to Wally World for some med refills.
Made a peep sight for my underhammer today. Much easier on the old eyes than the barrel sight was.
That’s going to be a fine gun!
- Joined
- Nov 12, 2018
- Messages
- 279
- Reaction score
- 957
First shots today through the ASM 1858 Remington brass-frame "Buntline" that I purchased here from @BigSkyRambler. Gun detail here: https://www.muzzleloadingforum.com/threads/nice-asm-1858-buntline.186196/
Loading with 25 gr 3F and a felt wad between powder and 0.454 ball with #11 caps ignited only three out of six chambers due to caps either falling off or not igniting and just getting mutilated. Replaced with #10 caps on unfired chambers and repeated. Shooting results with target at seven paces (my usual distance for first shots to judge accuracy and sights, if so equipped) were excellent:
The impression and tear above center mostly likely due to a wad that hit paper. But sights apparently right on. In fact, no cap 'n ball revolver I own has shot this well on first try.
This gun obviously prefers #10 caps. So reloaded cylinder with same charge and same balls, but no wads, primed with #10 caps, and moved target out to 25 yds. Three shots to confirm sights were just a little right and a little high, but nicely grouped (sorry, no pic), so then three shots at the dinner-plate gong at that range and rang it two out of three shots.
That's all I really wanted to do today with this gun, and I counted it as a day with range goals achieved.
Loading with 25 gr 3F and a felt wad between powder and 0.454 ball with #11 caps ignited only three out of six chambers due to caps either falling off or not igniting and just getting mutilated. Replaced with #10 caps on unfired chambers and repeated. Shooting results with target at seven paces (my usual distance for first shots to judge accuracy and sights, if so equipped) were excellent:
The impression and tear above center mostly likely due to a wad that hit paper. But sights apparently right on. In fact, no cap 'n ball revolver I own has shot this well on first try.
This gun obviously prefers #10 caps. So reloaded cylinder with same charge and same balls, but no wads, primed with #10 caps, and moved target out to 25 yds. Three shots to confirm sights were just a little right and a little high, but nicely grouped (sorry, no pic), so then three shots at the dinner-plate gong at that range and rang it two out of three shots.
That's all I really wanted to do today with this gun, and I counted it as a day with range goals achieved.
Black powder bear hunting today, this is all I saw. Sun at your back, face in the wind.
- Joined
- Oct 6, 2020
- Messages
- 1,651
- Reaction score
- 2,709
That looks so good!!
Moe ziggley
32 Cal
Found at auction a 45 cal inline..got it for 42.50..cleaned it yesterday and today gonna clean it again tomorrow.. don't think it was ever fired..no rust..just anti seize everywhere.. someone put it up for some reason maybe just got old like me..I noticed l been greasing stuff up for the long run..gonna gift it to my daughter for Christmas it's a match for the 50 i gave her last year..
One of the places on my bucket list when we finally get moved closer.View attachment 357576
Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!
Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.
Everyone Welcome!
Mike in FL
50 Cal.
I wish I were there!
Currently deer hunting with my Hawken it’s opening morning of the muzzleloader deer so far no deer and no shots that I’ve heard
Norman Brooks
45 Cal.
- Joined
- Mar 13, 2020
- Messages
- 7,492
- Reaction score
- 21,008
- Location
- On the Border in Idaho looking at BC
took a break from rolling up hoses, blowing out water lines, and picking up all the summer leaverites to meet the big brown truck. got a looong box full of fun stuff.
now i can shelve the maple stock and work on a walnut for a while.
going to be a fowler. Colerain barrel, and other quality parts from Dave/ aka Az Muzzleloaders
now i can shelve the maple stock and work on a walnut for a while.
going to be a fowler. Colerain barrel, and other quality parts from Dave/ aka Az Muzzleloaders
