from the last post I did I was haveing problems with the sights on my 58 turned up all the way and a large load of 120 of 3 f to get the ball at 100 yards some said the barrel might be bent ,what I did was get a longer screw so I could adjust it more without the sight poping out well it worked but can the barrel bend more or will it stay that way for my life time ?also the fine line in between 80 an 90 grains after I shoot and swab the barrel @80 grains it is still clean @ 90 grains it`s black goooo is that my barrel telling me that 80 grains is enough and the rest is overkill?
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
bent barrel?
- Thread starter queball
- Start date
Help Support Muzzleloading Forum:
- Joined
- Apr 3, 2004
- Messages
- 15,602
- Reaction score
- 19
Lower that front sight.
Mad Irish Jack
40 Cal.
:thumbsup: :thumbsup: Double Ditto!
You also might consider replacing the front sight with one about half the height.:hmm: That may allow some more leeway with the adjusting of the rear elevation sight. :winking:
You also might consider replacing the front sight with one about half the height.:hmm: That may allow some more leeway with the adjusting of the rear elevation sight. :winking:
