Charge holders

To each his own. Personally I like doing it on the spot but if that makes him feel better about shooting, more power to him.

Hey, nothing says "tradition" like 30 plastic vials or cigar tubes. :rotf:

 

[FrontierMuzzleloading]

we're talking out on the shooting range.

Nothing says traditional like being on the computer

 

[azmntman]

:applause: :thumbsup:

 

[coloradoclyde]

Well look at it this way. If one uses a loading block with his pre lubed patches and balls in place for easier reloading, why wouldnt he or she bring along pre measured charges?

I don't shoot patched balls out of my revolvers... :haha:

I also don't generally use a loading block for a rifle either.... and my powder horn or flask has a measure on it.

 

[RonRC]

I have an excellent reason for using patched ball holders: given my current level of woodworking skills, it is one of the only wooden items I can build without messing it up. :grin:
Ron

 

[coloradoclyde]

Oh they're fun and easy to make, and I've still managed to screw them up.....

 

[azmntman]

:metoo: Made a NICE one once, finshed, carved, ready to go. Then I drilled it TOO BIG :redface: Was for a .54 then it was a .58 and still worked out. I can screw bout anything up :idunno:

 

we're talking out on the shooting range.

Nothing says traditional like being on the computer

Nice try, but nobody is "muzzleloading" on the computer. :shake:

Try again.

 

[coloradoclyde]

we're talking out on the shooting range.

Nothing says traditional like being on the computer

Nice try, but nobody is "muzzleloading" on the computer. :shake:

Try again.

op:

 

[mooman76]

we're talking out on the shooting range.

Nothing says traditional like being on the computer

Nice try, but nobody is "muzzleloading" on the computer. :shake:

Try again.

Just because you want to be PC doesn't mean everyone else does. And absolutely nobody is 100% PC, no matter who they are or what they think.

 

Just because you want to be PC doesn't mean everyone else does. And absolutely nobody is 100% PC, no matter who they are or what they think.

Really? We're glad you cleared that up, because we thought that everyone was 100% PC all the time.

 

[eggwelder]

a 7.62 x 39 russian steel case holds 30 gr of BP when full to top. a cut down brass .223 or 5.56 case slightly expanded with said russian case makes a friction fit cap. notice the flared shape of the rim of the 5.56 case. the photo shows a 30-06 case, which holds 70 gr of BP. they fit in your pocket and if you lose them, they`re just empty casings. I mostly measure at the range and use the casings for walks in the woods. going to try the paper cartridge soon too.

 

[Rifleman1776]

I have an excellent reason for using patched ball holders: given my current level of woodworking skills, it is one of the only wooden items I can build without messing it up. :grin:
Ron

This thread is about pistol loading. Hope you are not using patched balls in a C&B revolver. :shocked2: Mods probably should have moved this to pistol forum. :nono:
Now, I'm moderating the moderators. :shocked2: Been nice knowing you guys.

 

[Dean2]

To me the answer is flask and measure or switch to cartridge gun. Halfway in between on a 6 shooter really doesn't work very well.

Paper cartridges loading into a revolver is a pain in the butt and doesn't really speed things up much. Pre-measured plastic loads with the ball on top work but you still need to lube the openings so really, how much time have you saved over dumping 6 measured loads from a flask, drop on 6 balls and lube.

 

[mooman76]

Just because you want to be PC doesn't mean everyone else does. And absolutely nobody is 100% PC, no matter who they are or what they think.

Really? We're glad you cleared that up, because we thought that everyone was 100% PC all the time.

Anytime! Just let me know next time you need help. :rotf:

 

Just because you want to be PC doesn't mean everyone else does. And absolutely nobody is 100% PC, no matter who they are or what they think.

Really? We're glad you cleared that up, because we thought that everyone was 100% PC all the time.

Anytime! Just let me know next time you need help. :rotf:

I will. If anyone needs help reenacting "Captain Obvious", you’re the man to contact.

 

[rodwha]

Using paper cartridges both sped up the loading of my revolvers, which kept the interest level higher for my friends, but also helped ensure all of my powder load was placed in the chambers on windy days.

I'm at a loss how paper cartridges couldn't speed up your process.

I typically use my flask and an adjustable rifle measure with a funnel. I'm not overly concerned with speed usually.

 

[Billnpatti]

Talk to your pharmacist. They order large numbers of various containers for medications from a supplier. If the pharmacist doesn't have any that he will sell you, he can probably include an order for some in his next order for more pill bottles. Look at either his catalog for containers or go to the website for his supplier and find exactly what you want. Then have him order a box of them for you with his next shipment order. Other than that, do a web search for what you want. Some suppliers may not sell directly to you but others will.

I Googled "screw top vials" and found some that will work nicely for you on flebay. I tried to post the website for you but couldn't. Just do a web search for "screw top glass vials" or "screw top plastic vials" depending on which you prefer. and you will find them.

 

[RonRC]

I have an excellent reason for using patched ball holders: given my current level of woodworking skills, it is one of the only wooden items I can build without messing it up. :grin:
Ron

This thread is about pistol loading. Hope you are not using patched balls in a C&B revolver. :shocked2: Mods probably should have moved this to pistol forum. :nono:
Now, I'm moderating the moderators. :shocked2: Been nice knowing you guys.

I am talking about side lock, front stuffing pistols, but I think I can see the source of the miscommunication.
I sit a patch over the hole in the loading board, and place a round ball on top of the patch and push it in.
Then I can put powder in the pistol or rifle, place the patched ball over the muzzle, and ram it down the barrel.

Ron