- Joined
- Aug 6, 2005
- Messages
- 7,093
- Reaction score
- 5,385
A kind-hearted soul on the Whitworth FB pages sent me a selection of Whitworth-style bullets of various kinds to help me make my mind up about getting a suitable mould, or not. I thought I'd share them with you.
a. As cast from the Pedersoli mould - he notes that due to the separate nose-piece this mould takes a good while to come up with the goods, and needs to be kept working one starting to produce keep-worthy bullets.
b. As cast from the K.A.L mould, with 9~ onion-skin paper wrap. Put on wet and folded under the base.
c. As cast Pedersoli bullets with the onion-skin wrap and d. with very thin print paper.
Note that the bore of my P-H Whitworth is .4485" - IOW, tight, although geometry being what it is, a nekkid .451" sized Lyman bullet WILL go down nicely. So, bullet b is a good close fit and would go down with little effort, probably under the weight of the ranging rod alone. Bullet c is somewhat closer but is still an easy loader, and d is pretty tight, but still goes down, albeit with some effort.
Here is the pattern for the paper patch, thanks to the same kind soul - this is from an original provided by K.A.L. in Manitoba.
PS- if anybody in UK is interested, I have a contact in the Channel Islands who is in the process of making Whitworth moulds to any width a/f, as well as cylindrical pattern as well. PM me for details.
a. As cast from the Pedersoli mould - he notes that due to the separate nose-piece this mould takes a good while to come up with the goods, and needs to be kept working one starting to produce keep-worthy bullets.
b. As cast from the K.A.L mould, with 9~ onion-skin paper wrap. Put on wet and folded under the base.
c. As cast Pedersoli bullets with the onion-skin wrap and d. with very thin print paper.
Note that the bore of my P-H Whitworth is .4485" - IOW, tight, although geometry being what it is, a nekkid .451" sized Lyman bullet WILL go down nicely. So, bullet b is a good close fit and would go down with little effort, probably under the weight of the ranging rod alone. Bullet c is somewhat closer but is still an easy loader, and d is pretty tight, but still goes down, albeit with some effort.
Here is the pattern for the paper patch, thanks to the same kind soul - this is from an original provided by K.A.L. in Manitoba.
PS- if anybody in UK is interested, I have a contact in the Channel Islands who is in the process of making Whitworth moulds to any width a/f, as well as cylindrical pattern as well. PM me for details.
