Not too happy with Brown Bess purchase, best way to fix?
- Thread starter VA Guy
- Start date
Help Support Muzzleloading Forum:
I have an early Pedersoli "officers". Prolly decades old. Its wood to metal fit is impeccable, as is the metal finish and lock work. I think the company is in trouble like the Italian Govt is right now. My Italian friends say labor and political issues are really affecting their lives. Sound familiar?
Jobber?
SchwartzStock
32 Cal
- Joined
- Jan 20, 2021
- Messages
- 38
- Reaction score
- 29
Back, Back, Back.....
SS
SS
don't you under stand what a jobber is? go to a dictionary and look it up.
erhunter
45 Cal.
With all due respect, I think it is time to make and post your decision. The folks on this forum have been more than helpful. Have a good day and shoot straight!
Whats with the attitude pal?
++ on the Lodgewood Mfg. They did a great job on stripping of all markings from a BB lock so I could make a plain COS musket. Definitely stay away from the Indian Muskets. I ONLY recommend those to SAR color guard who only want to carry and not fire a musket (parades, etc). I've had several Pedersolis, both Charleville and BB and found their quality to be excellent. This was obviously and exception.
Gotta give the vendor a chance to respond in order to have a “rest of the story....”
Anyway, I called the vendor and I’m getting a prepaid label to return the item. Assuming everything works as it should, I’d call that a fair resolution.
As far as a replacement... I found a particularly fine example on the classifieds that looked a lot better than mine. Win-win.
It is good to hear that this is not typical of Pedersoli offerings. However, the fact that this sort of thing can slip through the crack does give me concern and think that my future purchases of their products will require in person inspection or actual photos of the specimen in question.
I do appreciate everyones input!
He probably hasn't had his coffee yet this morning. I've only had one mug full and still feeling kinda cranky....... Another couple of gallons to go and I'll start feeling right as rain.
old ugly
40 Cal.
i bought a pedersoli brown bess 10 or more years ago. mine had a fit problem at the tang with a big gap. at first i was told they don't guarantee wood, but upon further inquiries i was told to send it back and they would take care of the issue... i figured it would probably come back worse so i kept it the way it was. i ended up seilling it. i didn't realy like the gun.
ou
tom
ou
tom
Celticstoneman
40 Cal
I really have to say that you are correct, it is made by fallable humans. Humans that knowingly sold a third rate product for a first rate price. That company product does not pass the sniff test.
FlinterNick
69 Cal.
- Joined
- Nov 1, 2018
- Messages
- 3,910
- Reaction score
- 2,937
You don’t need to restock. It just needs to be refinished.
The lock area is an odd Error, the casted bur obviously needs filing down, that’s an unfortunate error, if you can return the gun you may want to consider that route And exchange for a better one. Again, that;s an unusual mistake.
If you keep the gun, I would do the following
Clean up the lock plate, fill that tiny hold with a mixture of wood glue and walnut saw dust,
the side plate you can peen the edges for a tighter fit.
The thimbles are not very tight, but this is a common mistake, I would coat the inletted area with a slow drying glue with a dark dye or wood dust mixed in.
After stripping down the stock and staining, and I would fill the areas with a 5 min epoxy, waxing the metal parts so they don’t stick.
Smooth over with 220, blend to the surface.
use a a dark walnut dye rather than a stain For the wood until the stock and filled areas are uniform in color.
seal the stock with many coats of permalyn sealer until its hard and shiny.
Workdown the sealer with 320-400 grit paper until the color of the stock is almost a gray color.
Rub down with linseed oil or pure tung oil and your stock should be pretty tight and uniform.
As far as restocking, not worth it. Chances are a precarved stock like from Dunlap, will have some flaws in it that you have to do the same kind of work on.
If you want a perfectly carved stock, You’d want to make that investment right, have a real expert do that work.
there is a good instructional video on midway USA about sealing up stocks, this works great for stocks that have had gaps filled and cracks repaired.
I had an old navy arms bess which I did this to, and the stock was almost like Brand New.
The lock area is an odd Error, the casted bur obviously needs filing down, that’s an unfortunate error, if you can return the gun you may want to consider that route And exchange for a better one. Again, that;s an unusual mistake.
If you keep the gun, I would do the following
Clean up the lock plate, fill that tiny hold with a mixture of wood glue and walnut saw dust,
the side plate you can peen the edges for a tighter fit.
The thimbles are not very tight, but this is a common mistake, I would coat the inletted area with a slow drying glue with a dark dye or wood dust mixed in.
After stripping down the stock and staining, and I would fill the areas with a 5 min epoxy, waxing the metal parts so they don’t stick.
Smooth over with 220, blend to the surface.
use a a dark walnut dye rather than a stain For the wood until the stock and filled areas are uniform in color.
seal the stock with many coats of permalyn sealer until its hard and shiny.
Workdown the sealer with 320-400 grit paper until the color of the stock is almost a gray color.
Rub down with linseed oil or pure tung oil and your stock should be pretty tight and uniform.
As far as restocking, not worth it. Chances are a precarved stock like from Dunlap, will have some flaws in it that you have to do the same kind of work on.
If you want a perfectly carved stock, You’d want to make that investment right, have a real expert do that work.
there is a good instructional video on midway USA about sealing up stocks, this works great for stocks that have had gaps filled and cracks repaired.
I had an old navy arms bess which I did this to, and the stock was almost like Brand New.
Similar threads
