What Muzzleloading Stuff Did You Do Today?

[wayne1967]

Found out apparently I suck at soldering. Done years ago and when I pulled it off the wall to dust it off noticed the barrel loose at the end.

 

[RobertIN]

Working on rehabilitating my Colonial. Got the second seal coat of Permalyn on last night, Tried and True to follow. Standard maple for reference.

I did forget to drill a hole for the rearmost pin in the barrel, since the hardware is from an old kit when they came with Rice barrels and the lug has moved forward a small amount. Shouldn't need that pin but if I have accuracy issues I'll know where to start.

Also need to clean the sear hole in the lock inlet a little more I'm getting a tiny bit of interference with the Chambers lock going into a Kibler inlet but I don't have a gouge small enough to get in there... Goes to full cock with a bit of encouragement but I'd still like it to be free of any rubbing.

 

[rmark]

Cast and sized some .45 minie bullets to try out in the Pedersoli Tryon Creedmore rifle.

 

[Encore50Cal]

Got ready for a deer hunt but mother nature decided to sprinkle some liquid sunshine on the day. Guess my hunt will wait for another day. I am trying for my first PRB deer. Maybe Santa will leave one of his behind for me.

 

[WALT53]

Shot my Frontier caplock again today. Same load, T7 2fg, 50 grains, .010 patch, .490 ball. Great results again today at 50 to 100 yds off hand.

Any patch readers on here? I'm hitting 8" gongs at 100 yds so seems to be working for me.

View attachment 370655

Anyhow, had a good time. Sure could use some snow though.

View attachment 370656

Patch’s look great what are you using for lub.

 

[Terrier]

Got ready for a deer hunt but mother nature decided to sprinkle some liquid sunshine on the day. Guess my hunt will wait for another day. I am trying for my first PRB deer. Maybe Santa will leave one of his behind for me.

If you’re looking for one from Santa’s herd, you would be better off going ahead and hunting today. They are “Raindeer”, ya know.

 

[Omahkapi'si]

Patch’s look great what are you using for lub.

Very little Wonderlube.

 

[sethwyo]

Found a place to carry my maintenance tool, it can go in the flap of a ball pouch, easy in , stays secure, easy out.

 

[WALT53]

Very little Wonderlube.

What ever works is what matters .

 

[RobertIN]

Third coat of Permalyn finish cut with turp is drying, first coat where it's building up. It feels like I'm not using enough, but from what I gather that's how it's supposed to be ?

Edit: Still a little tacky after a night with the dehumidifier, running the heater in there for another hour to warm it back up.

Also this heater is peak lighting for this kind of thing, my goodness. Double use for lighting and heating small spaces

 

[bajabuc]

View attachment 370560View attachment 370561

Brass wedge plate...without holes...it looked sio cool...but...i know it would fall out no matter how well i glued it...so steel wedgeplate installed for the holes. I'll drill it

 

[Loja man]

Third coat of Permalyn finish cut with turp is drying, first coat where it's building up. It feels like I'm not using enough, but from what I gather that's how it's supposed to be ?

Edit: Still a little tacky after a night with the dehumidifier, running the heater in there for another hour to warm it back up.

Also this heater is peak lighting for this kind of thing, my goodness. Double use for lighting and heating small spaces
View attachment 370856View attachment 370857

That is looking amazing!! Can’t wait to see your finished pics!!
I have had two hawks in my furnace room by my wood burning furnace to help dry some tung oil!