What size is .62cal?

[tg]

There is one thing that todays ML's seem to share with their ancestors and that is inconsistancy/ lots of variance in bore size of a given cal/bals per lb /gauge or gun in the past a gun of (x balls to the lb) which equaled a .562 ball might have a bore size of .577 thru .623 and be acceptable, todays guns are not quite as varied but seem to retain some of the scope allowed in the past for bore tolerance and still be correct for the Cal.

 

[Chiefs50]

My Colerain .62 measures .612.

 

[Mike D]

Generally, a ball that is at least .015", and better, .020", SMALLER than your actual bore diameter will give you the range of options in choosing the thickness of your fabric patches, so that you can get the best accuracy.

The key to success is to actually MEASURE your bore diameter- and don't trust what the maker says it might be. Rarely will you find any barrel maker actually test firing barrels before they go out the door. And, Gunmakers rarely do that kind of testing for a customer.

"It should be no surprise to any buyer that the bore of that barrel isn't the same as the Nominal diameter the Barrel is SUPPOSE to BE!" It should be no surprise to any buyer that the bore of that barrel isn't the same as the Nominal diameter the Barrel is SUPPOSE to BE! "

Spot On....these jokers don't know the definition of Nominal. my Pedersoli is dead on as advertised .620, True.

 

[Clark Badgett]

You revived a long dead thread to reply to a person that has passed on.

 

[Brokennock]

You revived a long dead thread to reply to a person that has passed on.

Poor guy passed on before he ever got his long awaited response.


RIP Paul

 

[bpd303]

I miss Paul Villandigha and his wisdom.

For others interested in this thread, I have a brace of Tower 1777 Sea Service pistols made in Japan stated 62 caliber but one measures 0.615 and the other measures 0.620 they both shoot good with 20 gauge wads and .600 cast pure lead balls or 0.12 linen patches.

 

[hanshi]

I'm sure Paul got the post and doesn't mind it being late. For the rest of us we not only get the message but have the ability to test it as we wish.

 

[springfield art]

My TRS M1776 is .62 but haven't shot it yet. Have some commercially made .62 balls, will know more later. Patch size can be adjusted, too. Don't know who made the barrel for the TRS M1776, anyone know? (Early 80's period production). Thx

 

[waksupi]

.595.