1General_Grant
40 Cal
Title.
Looking to buy a used flintlock, how do I know if it will throw good sparks?
- Thread starter 1General_Grant
- Start date
Help Support Muzzleloading Forum:
All depends on the quality of the lock. If the lock is Chambers or Kibler's you are good to go for sure. CVA, Pedersoli, Traditions are a tossup. Just my opinion.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,009
- Location
- On the Border in Idaho looking at BC
well Mr. President, you can take the best lock or the worst lock and if they aren't set up right neither will spark worth squat!
the geometry of flint to frizzen, strength of main spring, strength of frizzen spring all effect the spark.
the only way to know if a lock you didn't set up will spark is to trip the sear and watch for sparks.
by the by, never trip the sear without the frizzen being closed over the pan. nasty things can happen.
p.s i voted for you according to my wife.
the geometry of flint to frizzen, strength of main spring, strength of frizzen spring all effect the spark.
the only way to know if a lock you didn't set up will spark is to trip the sear and watch for sparks.
by the by, never trip the sear without the frizzen being closed over the pan. nasty things can happen.
p.s i voted for you according to my wife.
1General_Grant
40 Cal
What about a Miroku lock?
1General_Grant
40 Cal
Does a frizzen need to be case hardened for good sparks?well Mr. President, you can take the best lock or the worst lock and if they aren't set up right neither will spark worth squat!
the geometry of flint to frizzen, strength of main spring, strength of frizzen spring all effect the spark.
the only way to know if a lock you didn't set up will spark is to trip the sear and watch for sparks.
by the by, never trip the sear without the frizzen being closed over the pan. nasty things can happen.
p.s i voted for you according to my wife.
- Joined
- Jul 5, 2012
- Messages
- 2,263
- Reaction score
- 3,625
A good lock can function poorly, and a poor lock can function fantastic. Case in point Indian Murdock (tuned from veteran arms), there is no powder in the pan. A good locksmith can make most anything throw sparks but some will take more effort than others.
- Joined
- Jun 17, 2019
- Messages
- 8,399
- Reaction score
- 9,812
Should be able to "dry fire" it; hurts nothing. But as Dave Marsh said, almost any lock will need 'tweaking'.
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,009
- Location
- On the Border in Idaho looking at BC
the frizzen face is hardened yes.
Clock it and close the frizzen. Pull trigger
To me same as CVA, Traditions and Pedersoli. My opinion only based on what I have read over the years and in several cases personal experience.
IT has been said before "it doesn't matter how many sparks it throws as long as they go into the pan and set off the prime fast every time" I personally own a CVA that never has to be primed (tuned L&R RPL lock ) doesn't throw hardly any sparks but it is the fastest lock I've seen and never fails the only lock I haven't put it up against is the Kibler but I've heard that that one isn't any better then a well tuned Chambers siler
1General_Grant
40 Cal
Should I take the risk and buy it?
Last edited:
- Joined
- Mar 13, 2020
- Messages
- 7,493
- Reaction score
- 21,009
- Location
- On the Border in Idaho looking at BC
not being snide or anything, but buying anything today is a risk.
if you like the look, it mounts well, balances good, and the trigger feels good, the flint/frizzen throws sparks, and you can afford the purchase price, let us know when you get that first grin from shooting it.
or you could start out with a used TC or even a traditions etc for half the money.
personally, i would go for it. but as my bride says, I have never seen a gun i didn't like.
if you like the look, it mounts well, balances good, and the trigger feels good, the flint/frizzen throws sparks, and you can afford the purchase price, let us know when you get that first grin from shooting it.
or you could start out with a used TC or even a traditions etc for half the money.
personally, i would go for it. but as my bride says, I have never seen a gun i didn't like.
When buying even a NEW muzzleloader, Hawken or other brand....make certain that the triggers are set up correctly!
1General_Grant
40 Cal
What do you mean by that?
1General_Grant
40 Cal
I could always have the lock worked on if it isn't so good. I'll go for it.
IMPO $1,299.99 is about 500-600$ to high. They are not made any longer-so any work or parts will be extra.
Let me see if I can sum this up and please don't take offense as it is not intended. You're going to spend $1300 on a gun that is worth probably half that. No longer in production with a reputation that isn't too bad. If the lock doesn't spark well, you're willing to spend $150+ to have it tuned. You asked for input and got it and in the end, you're going to buy it despite the advice given. Your money so go for it. Not sure why you bothered to ask the question in the first place.
- Joined
- Mar 13, 2014
- Messages
- 15
- Reaction score
- 26
Please be POSITIVE that the barrel was not left loaded before you test for sparks with the lock in the rifle or smoothbore. I have purchased used Muzzloader and found a couple that had active loads in the barrels. Be careful.
1General_Grant
40 Cal
Similar threads
