What Muzzleloading Stuff Did You Do Today?

Banjoman · Oct 23, 2024

deerstalkert said:
whatever it be, looks good without the paint.
mostly i can't nail down what wood is without smelling it. my father had sawmills before i was born and i can't remember when he didn't have one until he passed. I get chills smelling a fresh cut board.
last mill he had we milled a black walnut. he has been gone 30 years and i still have some of that walnut.

The wood is light weight and soft. Really soft. Doesn’t take much to put a blemish on it. The steel seems okay though. Probably why these were thrown in on a trade.

. I can always change the wood later if needed.

Dale Lilly · Oct 23, 2024

Ohio Rusty said:
The last three days I spent at the Quad State blacksmith roundup in Troy Ohio. Tailgate sales netted me some fun stuff. Most of the blacksmith hammers and ball peens I paid $1 for I'm happy for the coil spring to make tools as I didn't have any in that size. The little lead pot will be handy when I get it cleaned up. The big stake anvil in the middle is awesome. It was a working anvil when George Washington was alive. I'm looking forward to getting it stump mounted and forge historical things on it as was done originally.
Ohio Rusty ><>

Thanks for display; I've never seen a stake anvil. Dale

smo · Oct 24, 2024

Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!

Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.

Everyone Welcome!

Terrier · Oct 24, 2024

smo said:
View attachment 357576

View attachment 357575

Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!

Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.

Everyone Welcome!

Would have loved to have come, but I just spent this past week camped ahead of our Tennessee Longhunters shoot. I’m still ragged out…. It was mighty chilly last week!

Hatchet-Jack · Oct 24, 2024

Finished inletting the thumb piece.

DrLaw · Oct 24, 2024

"Surprise, surprise!" as Gomer would say. The barrel slid into place today. No extra wood shaving needed for the Kibler Fowler. Pin holes lined right up, too. I had been having problems with it fitting. However, the barrel was cold today and maybe that was it.
The Doc is literally out now heading to Wally World for some med refills. :horseback:

Nobade · Oct 24, 2024

Made a peep sight for my underhammer today. Much easier on the old eyes than the barrel sight was.

PathfinderNC · Oct 24, 2024

Hatchet-Jack said:
Finished inletting the thumb piece.
View attachment 357630

That’s going to be a fine gun!

PathfinderNC · Oct 24, 2024

Made a Lobed powder horn today. It’s ready for engraving.

Moleman · Oct 24, 2024

Shot the NW Trade gun today. It's beautiful here in S.E Indiana and a joy to be in the woods on my range.

wiscoaster · Oct 24, 2024

First shots today through the ASM 1858 Remington brass-frame "Buntline" that I purchased here from @BigSkyRambler. Gun detail here: https://www.muzzleloadingforum.com/threads/nice-asm-1858-buntline.186196/

Loading with 25 gr 3F and a felt wad between powder and 0.454 ball with #11 caps ignited only three out of six chambers due to caps either falling off or not igniting and just getting mutilated. Replaced with #10 caps on unfired chambers and repeated. Shooting results with target at seven paces (my usual distance for first shots to judge accuracy and sights, if so equipped) were excellent:

The impression and tear above center mostly likely due to a wad that hit paper. But sights apparently right on. In fact, no cap 'n ball revolver I own has shot this well on first try.

This gun obviously prefers #10 caps. So reloaded cylinder with same charge and same balls, but no wads, primed with #10 caps, and moved target out to 25 yds. Three shots to confirm sights were just a little right and a little high, but nicely grouped (sorry, no pic), so then three shots at the dinner-plate gong at that range and rang it two out of three shots.

That's all I really wanted to do today with this gun, and I counted it as a day with range goals achieved.

Dutch7 · Oct 24, 2024

Black powder bear hunting today, this is all I saw. Sun at your back, face in the wind.

Loja man · Oct 24, 2024

Hatchet-Jack said:
Finished inletting the thumb piece.
View attachment 357630

That looks so good!!

Moe ziggley · Oct 25, 2024

Found at auction a 45 cal inline..got it for 42.50..cleaned it yesterday and today gonna clean it again tomorrow.. don't think it was ever fired..no rust..just anti seize everywhere.. someone put it up for some reason maybe just got old like me..I noticed l been greasing stuff up for the long run..gonna gift it to my daughter for Christmas it's a match for the 50 i gave her last year..

Lt.Mudge · Oct 25, 2024

Made another batch of lubed patches in a saucepan on the stove with beef tallow and a tiny bit of beeswax.

rp77469 · Oct 25, 2024

smo said:
View attachment 357576

Good early turn out at Hatchie Run Longrifles annual Fall camp…
The weather is great and folks are coming out too burn some powder!

Camp starts Friday near Ashland Ms ..
For those interested the club has a face book account with all the info and directions.

Everyone Welcome!

One of the places on my bucket list when we finally get moved closer.

Mike in FL · Oct 25, 2024

rp77469 said:
One of the places on my bucket list when we finally get moved closer.

I wish I were there!

lou puleff · Oct 25, 2024

Currently deer hunting with my Hawken it’s opening morning of the muzzleloader deer so far no deer and no shots that I’ve heard

Norman Brooks · Oct 25, 2024

A friend of mine in the process of making a temporary plug for sizing the big end of a cow horn after boiling.

deerstalkert · Oct 25, 2024

took a break from rolling up hoses, blowing out water lines, and picking up all the summer leaverites to meet the big brown truck. got a looong box full of fun stuff.
now i can shelve the maple stock and work on a walnut for a while.
going to be a fowler. Colerain barrel, and other quality parts from Dave/ aka Az Muzzleloaders

What Muzzleloading Stuff Did You Do Today?

Help Support Muzzleloading Forum:

Eager to learn and willing to teach.

54 Cal.

70 Cal.

40 Cal

Attachments

54 Cal.

40 Cal.

32 cal

Artist

Artist

Attachments

40 Cal

Attachments

70 Cal.

45 Cal.

54 Cal.

32 Cal

32 Cal

Pilgrim

50 Cal.

32 Cal.

45 Cal.

Attachments

Cannon

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!